Replacement Keys for etrailer.com Locks

Question

Question:

Can this key be replaced if lost?

asked by: Taunia

0

Expert Reply:

Yes, the keys from our etrailer.com Coupler Lock, # e98889, and other etrailer.com locks can be replaced if they are lost, but I strongly recommend recording the key number that is stamped on the key. The key number is used for replacement keys, so I recommend writing the key number down and keeping it somewhere safe just in case you lose the keys. This key number should also be stamped on the lock core. The key number will be 3 digits and it usually starts with a zero.

If you do not have the key number, you would have to get a new lock to have multiple keys.

expert reply by: John H

0

Answer 1

The etrailer Trailer Wheel Lock #288-02020 is keyed unique. Someone else who has this wheel lock would not be able to use their key to remove this from your tire.

view full answer...

Answer 2

To select the correct ball mount that will allow you to tow level, you must take two measurements into consideration. First, measure from the ground (on level ground) to the top inside portion of your square hitch receiver opening. Second, measure…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover, you will also…

view full answer...

Answer 7

Hey Travis, congrats on the new 2024 Jayco Flight 284BHS! Your travel trailer looks to have a GVWR of 7,950 lbs so I recommend going with the Equal-i-zer Weight Distribution w/ 4-Point Sway Control #EQ37121ET and pairing it with the Shank…

view full answer...

Answer 8

Hey Antoine, so the two kits you mentioned are actually really similar and honestly I would go with the part #ETBC7 if I were you. The #ETBC7L is basically the same thing minus a couple wires and breakers so you may as well get the kit that has…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

Hey HPA, I would go with the Air Lift kit part #AL64VJ that fits your 2019 Toyota RAV4 based on what you described and your needs. This gives you adjustable support that you can tailor as needed so that you get the exact amount of support you need…

view full answer...

Answer 11

Thanks for the pictures of your roof vent lid Marty! Based on that the correct replacement is the Ventline part #BVD0449-A01 that you referenced if you wanted white or the part #BVD0449-A03 for the same smoke color you have now.

view full answer...

Answer 12

Hey Frankie, The bracket for the Timbren Suspension Enhancement System #TFR250SDJ has a locknut in it that makes it feel like the bolt (part #4) is fully tightened when it's not. Their techs have stated that you just have to push past this point…

view full answer...

Replacement Keys for etrailer.com Locks

Product Page this Question was Asked From

Continue Researching