Will Lift Kit for #10 Torflex Single Axle Work on Trailer

Question

Question:

Hi! I have a #10 torsion axle, but Im not certain if the way its mounted would make this lift kit unusable. Ive attached a picture and appreciate any help you can give!

asked by: Astacia S

0

Expert Reply:

Thank you for the photos they were very helpful and I can tell you that based on those you can absolutely use the Torflex Lift Kit # K71-707-01.

This will work on your #10 Torflex axle without any problem; it would only be an issue if you had high-profile brackets, which your axle does not have so you're set.

I have added a link below to the instructions for you to check out as well if you'd like of the Torflex Lift Kit # K71-707-01.

expert reply by: Kyle S

0

click to enlarge

Answer 1

Your 2022 Basecamp should have a Dexter Torflex torsion axle, and since it is 3,150 lbs it should also be a #10 Torflex axle. However, we have no way of verifying this so you'll have to take a peek under the trailer and at the axle itself; there…

view full answer...

Answer 2

It appears your 2018 Airstream Bambi Sport, 16' has a 3,500 lb. Torflex axle. You will want the #K71-707-01, this will give you a lift of 2-5/8 inches.

view full answer...

Answer 3

Based on my research your 2017 Airstream Basecamp travel trailer has a 4,000 lb Dexter Torflex axle; for that axle the correct lift kit is the Torflex Lift Kit - Single Axle - 2-5/8" Lift #K71-707-01. This lift kit is a fit for a #10 Torflex…

view full answer...

Answer 4

I looked up your Dexter axle info and you have a 3,500 lb Torflex axle which the part #K71-707-01 would be the correct lift kit for. This will give you a lift of 2-5/8 inches.

view full answer...

Answer 5

I can absolutely confirm the correct lift kit for your trailer. Based on your photos, you do in fact have a #10 Torflex axle, and they are compatible with the lift kits because you do not have 3" high-profile brackets (which just means the…

view full answer...

Answer 6

The Tekonsha OEM Vehicle Wiring Harness #22121 that you referenced includes all the wiring and parts necessary to install a fully functional 7-Way connector and trailer brake controller. The included brake controller harness is compatible with and…

view full answer...

Answer 7

Thank you for providing the specs for the suspension components that you already have. Correct hanger spacing really depends on the components being used such as springs, hangers and equalizers. Most of the hanger spacing dimensions that we have are…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

The correct replacement for a Demco Master Cylinder 05680-C is the Replacement Master Cylinder part #5650. I spoke with Demco to confirm this for you.

view full answer...

Answer 10

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 11

The correct replacement master cylinder kit we have for your Demco setup is the part #DM5918 which comes with the lock out replacement.

view full answer...

Answer 12

Yes, Replacement Cap Kit for HappiJac Manual Truck Camper Jacks #LC183332 is the correct kit. This is for your Replacement Jack #LC736514 (4220) or the complete setup HappiJac Manual Truck Camper Jack System - 34-1/2" Lift - 8,800 lbs…

view full answer...

Will Lift Kit for #10 Torflex Single Axle Work on Trailer

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching