Will EcoHitch Hidden Trailer Hitch Receiver Fit 2019 Ford Fusion Titanium

Question

Question:

I already have a Thule bike rack that needs a 2 inch receiver. Every auto parts place and installer tells me that I could only use a trailer hitch with a 1 and 1/4 inch receiver. That is all they will sell and/or install. If I find someone who could install this trailer hitch, will it fit? Could you tell me why they are not selling a 2 inch receiver trailer hitch if this one will fit?

asked by: Debra

1

Helpful Expert Reply:

I can absolutely confirm for you that the EcoHitch Hidden Trailer Hitch Receiver # 306-X7239 will fit your 2019 Ford Fusion Titanium.

This has a 2 inch receiver like you are needing and the receiver is the only part showing so your Fusion will maintain its aesthetic.

I can't tell you why others are not selling this other than they may not have it available, but it will fit, as you can see from the accompanying photo of a Ford Fusion Titanium with the EcoHitch Hidden Trailer Hitch Receiver # 306-X7239.

expert reply by: Kyle S

1

click to enlarge

Answer 1

Thank you for all of the information! We definitely have hitch mount bike racks that can hold up to 4 bikes and have been approved for a flat-towed vehicle so I recommend going that route as it would be easiest. I do have to say you'll want to…

view full answer...

Answer 2

I have an answer for you. When it comes to using a hitch adapter on your 1-1/4 inch hitch to accommodate a 2-inch accessory, it is important to note that any time you use an adapter/extender, you will be decreasing the overall weight capacity of the…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 7

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Answer 8

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 9

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

view full answer...

Answer 10

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

view full answer...

Will EcoHitch Hidden Trailer Hitch Receiver Fit 2019 Ford Fusion Titanium

Product Page this Question was Asked From

Continue Researching