Fit of Curt 13028 Class III Trailer Hitch on 1965 Chevy C10 Stepside Pickup Truck

Question

Question:

hi trailer hitch number 13028 fit on a chevy c10 1965 stepside thank

asked by: Michel R

0

Expert Reply:

I love that body style! The Curt # 13028 is a fit if the truck is equipped with the standard factory style or step bumper.

expert reply by: Mike L

0

Answer 1

The 1974 Chevrolet C10 is categorized as a C/K Series not a C-Series which I think may be where the problem lies. I recommend the Curt Trailer Hitch Receiver part #13028 which is a confirmed fit for a Chevrolet C10 from 1963-1987. The Draw-Tite…

view full answer...

Answer 2

The Curt Hitch part #13028 that you referenced is confirmed to fit your 1983 Chevy C-10. You will need to drill 6 holes to install all of the included mounting bolts for this hitch. Before you drill the holes you should note that the hitch must be…

view full answer...

Answer 3

I do have an option for you but I cannot recommend you add any spacers in between the trailer hitch and trailer frame as this would affect the integrity of the trailer hitch. Therefore, if the Curt Trailer Hitch Receiver part #13028 does not clear…

view full answer...

Answer 4

When measuring the frame width on a vehicle, you will need to measure from the outside of one frame rail to the outside of the other frame rail. If you have the larger frame width of 37-1/4 inches you would want the Curt Hitch part #C15300, or if you…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 34 inch frame for your 1998 Chevy C/K will mean you have the cab and chassis and not a standard pickup. So there are different hitches depending on if you have a cab and chassis (which is a 34 inch frame) or a standard pickup: - Cab and Chassis:…

view full answer...

Answer 7

The Curt Trailer Hitch Receiver part #13028 is a confirmed fit for your 1972 Chevrolet C-20 with the standard bumper. It will fit both the 6 and 8 foot bed models.

view full answer...

Answer 8

For your 1986 Chevrolet C/K Series pickup with 6-foot bed and step bumper we have no B&W hitch fits confirmed. Hitch #BWHDRH25198 fits only the version of your truck that has the deep drop bumper. The hitch options that do fit your truck are…

view full answer...

Answer 9

Sounds like your 1987 Chevy truck has the standard bumper which we have plenty of hitches for. The Curt hitch part #13028 is the most popular option we carry. When this is installed you will basically just see the hitch opening below the bumper. I…

view full answer...

Answer 10

The trailer hitch that fits your 1976 Chevy K10 short bed stepside, and will not interfere with your spare tire is the Curt Trailer Hitch Receiver #13028. You will need to remove the spare tire initially when you are installing the hitch, but you…

view full answer...

Answer 11

I attached a picture (not a great one) that shows the Curt hitch #13028 installed on a 1966 Chevy truck with a step bumper just like what you have so it would fit and work well.

view full answer...

Answer 12

We have trailer hitches that fit a 1965 Chevy C10 that attach to the truck frame like the Curt hitch part #13028 but none that would attach to the truck's bumper. The bumper is not nearly as strong as the frame so a frame mounted hitch is the way…

view full answer...

Fit of Curt 13028 Class III Trailer Hitch on 1965 Chevy C10 Stepside Pickup Truck

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching