Trailer Hitch Recommendation for 1965 Chevy C10

Question

Question:

DO YOU HAVE A BUMPER MODLE THAT CAN F IT A 1965 CHEVY C10 LONG BED PU

asked by: NORMAN F

0

Expert Reply:

We have trailer hitches that fit a 1965 Chevy C10 that attach to the truck frame like the Curt hitch part # 13028 but none that would attach to the truck's bumper.

The bumper is not nearly as strong as the frame so a frame mounted hitch is the way to go.

expert reply by: Jameson C

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

The Curt Hitch part #13028 that you referenced is confirmed to fit your 1983 Chevy C-10. You will need to drill 6 holes to install all of the included mounting bolts for this hitch. Before you drill the holes you should note that the hitch must be…

view full answer...

Answer 3

Yes. I've linked a picture of a Chevy C Series with the under-mounted spare tire to show you, but the Curt #C14082 will work with the stock spare tire mounting location on your 1971 C Series pickup and you won't need to make any modifications…

view full answer...

Answer 4

I attached a picture (not a great one) that shows the Curt hitch #13028 installed on a 1966 Chevy truck with a step bumper just like what you have so it would fit and work well.

view full answer...

Answer 5

I love that body style! The Curt #13028 is a fit if the truck is equipped with the standard factory style or step bumper.

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 9

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 10

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Trailer Hitch Recommendation for 1965 Chevy C10

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching