Replacement Hub and Drum With 25580 Inner Bearing and LM67048 Outer Bearing

Question

Question:

hello, I need to repace old hubs with new hubs and tire rims . The Bearings are LM67048/25580. The Brake assembly on the axle is no lon ger in use and will not be needed. What would you suggest without breakin the budget? I want to get away from the old rims shown in one of the pictures

asked by: Daniel S

0

Expert Reply:

Thanks for that info and we do have a replacement hub and drum for you with inner bearing # 25580 and outer bearing # LM67048, though you are going to need to take one more measurement, and with Digital Caliper # 301-17068 because it needs to be measured down to the thousandth of an inch.

So, the correct hub and drum will depend on the size of the grease seal, and you'll need to measure your spindle where the seal rides to get that measurement.

- 2.25" Diameter: Dexter Trailer Hub and Drum Assembly # K08-201-97

- 2.15" Diameter: Dexter Trailer Hub and Drum Assembly # 8-201-5UC3

These are rated for 5,200 lb axles and have a 6 on 5-1/2" bolt pattern so that is the bolt pattern of the wheels you will need. I have added a link to our selection of trailer tire and wheel combos with that bolt pattern for you to check out as well.

expert reply by: Kyle S

0

click to enlarge

Daniel S.

8/23/2020

hello, I need to repace old hubs with new hubs and tire rims . The Bearings are LM67048/25580. The Brake assembly on the axle is no lon ger in use and will not be needed. What would you suggest without breakin the budget? I want to get away from the old rims shown in one of the pictures

Reply

Kyle S.

8/23/2020

We do not carry a 14-1/2 inch rim with a 6 on 5-1/2" bolt pattern that will work with your 7-14.5 size tires. That size of tire and wheel is pretty rare, and you may have some difficulty finding parts in the future, so you might want to consider going with a new 15" rim and tire, which you can get for a very similar price to the wheel. Instead, I recommend checking out the Taskmaster Provider ST225/75R15 Radial Trailer Tire with 15" White Mod Wheel # A225R645WM. These are load range D tires with a 2,540 lb capacity, so you will want to make sure they are the correct load range for your set up, though they should be based on the hub capacity. For lug nuts you can use the Lionshead Trailer Wheel Lug Nut # LHLR103.

Reply

Answer 1

The Dexter Trailer Hub and Drum Assembly part #K08-201-97 is just what you need to convert to a 6 on 5-1/2" bolt pattern as it has an inner bearing with 1.750" diameter, outer bearing with 1.250" diameter, and a grease seal with a…

view full answer...

Answer 2

The 4T-LM67048 outer bearing is commonly referred to as a LM67048 and the 4T-25580 inner bearing is commonly referred to as a 25580. We have some hubs with both of these bearings, I recommend the Dexter Trailer Hub and Drum Assembly part #8-201-5UC3…

view full answer...

Answer 3

Mobile home axles are designed for a one time use and do not have a load rating. You may be able to find hubs and drums and other hub components for the specific spindles you have on the axles but that can be very difficult as mobile home axles…

view full answer...

Answer 4

Thanks for the information on your trailer. For your axle with brakes I recommend the Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb E-Z Lube Axles - 12" - 6 on 5-1/2 #AKHD-655-6-EZ-K if you have the spindles with the integrated grease…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

I was unable to find any information with the numbers on your axle, unfortunately. However, you can contact the manufacturer of the trailer and they should be able to tell you exactly which inner and outer bearings you have. If for some reason they…

view full answer...

Answer 7

Yes, the Bearing Kit, LM67048/25580 Bearings, 10-36 Seal #BK3-300 is exactly what you need for your 5,200 lb Dexter Axle on your Grand Design 5th wheel trailer.

view full answer...

Answer 8

When installing the pivot arms on your B&W Companion OEM 5th Wheel Hitch for Ram Towing Prep Package - Dual Jaw - 25,000lbs Item #BWRVK3600 you'll want to ensure that you have 6" of clearance between the bed rails and the nose of your…

view full answer...

Answer 9

I do have an option for you, but we do not carry the Dexter 072-027-00 you mentioned. However we do have the etrailer Double-Eye Spring for 7,000-lb Trailer Axles - 24-7/8" Long #e64SR which will be 3/8" shorter but that is still close…

view full answer...

Answer 10

B&W designed their Companion 5th wheel hitch with adjustable pivot arms for exactly the reason you describe. The pivot arms in the Ram OEM 25K version hitch #BWRVK3600 can be adjusted for both height and front-to-back position so that your…

view full answer...

Answer 11

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 12

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...