TruRyde Trailer Bearings Races Seals Caps - Bearings - BK3-300 Review Video

The Timbren Trailer Suspension Enhancement System for Underslung Axles #T92MR is 5-1/4" tall. Timbren recommends The spring be in constant contact with the frame at all times. So ideally you will want exactly 5-1/4" from your axle tube to…

It sounds like you are looking for the correct braking assemblies and hubs/drums from a Dexter D52 Axle. If that is the case then we have just what you need, the Dexter Nev-R-Adjust Electric Trailer Brake Kit part #23-458-459 and the Dexter Trailer…

If you look at the wheel cylinder of the brake assemblies part #23-399 and #23-398 you'll see the letters L and R stamped on them. The R means right hand side and L means left. I attached a picture that points out the letter. Right side means…

I reached out to my contact at Dexter and with the serial number you provided they were able to track down the correct replacement bearings for the spindles on your axles. For the inner bearing you will use part #25580 for the bearing itself and…

I do have an option for you but the Lippert Components Bolt-On Shock Kit like part #LC281281 is designed for use on overslung axles (leaf springs over axle) only. Therefore, it should not be used with the underslung (leaf springs under axle) axles…

Thanks for the photos of your trailer's actuator! They were very helpful in answering your questions. Based on the photos, it appears that you have a Titan Model 10 Actuator #T1607500. For a Model 10 actuator, the #DX66FR that you referenced is…

You can check the condition of your hub's races by carefully removing all bearing grease with a rag to expose the actual surface of the races. When they are completely free of grease, etc., inspect them for any signs of scoring (very slight…

We have the exact hub you are looking for as part number #8-201-5UC3. This is a 5,200 lb axle hub that has a bolt pattern of 6 on 5-1/2 inch.

The short answer is Yes, bearing #15123 is slightly larger and stronger than #LM67048 and they use different races which means they are not interchangeable. Bearing 15123 uses race #15245 which has an outer diameter of 2.441 inches and bearing…

To add a front mounted hitch to your 2023 Chevy Silverado 3500. You will want the EcoHitch Hidden Front Mount Trailer Hitch Receiver item #EH57FR. This hitch is custom fit and bolts to your Chevy with included hardware. This front mounted hitch has a…

The manufacturer of the TruRyde bearing and seals we carry like what come in the kit #BK2-100 is TRP International.

The inner diameters of the LM67048 and 15123 both are the same (1.250 inches). That means that a hub with either bearing in the outer bearing would fit your spindle. The part #AKHD-655-6-EZ-K would fit your axle.