Will a 20 inch by 60 inch Cargo Net work on a 24 inch by 60 inch Cargo Carrier

Question

Question:

DO YOU HAVE A 24X60 ? I HAVE THE PRO 24X60 CARGO CARRIER WILL A 20X60 NET WORK IF YOU DO NOT HAVE A24X60? THANKS FOR ANY HELP YOU CAN GIVE ME.

asked by: HARRY J

0

Expert Reply:

The Curt Stretchable Cargo Net # C18202 that you referenced would stretch enough to fit your 24 inch by 60 inch cargo carrier. We do not carry a 24 inch by 60 inch cargo net, but stretching the # C18202 an extra 4 inches would work just fine.

expert reply by: Jameson C

0

Answer 1

The Bolt Trailer Hitch Receiver Lock, #BL7023584, will work on Toyota vehicle's that use standard cut keys. The attached photo will show you the type of keys that are compatible for the Bolt lock. If you have a center cut key for your 2017 Toyota…

view full answer...

Answer 2

For the Pro Series Cargo Carrier part #63153 that you referenced the Curt Cargo Net part #C18202 that you referenced would be a great choice. The dimensions are very close and the fact that the net can stretch will mean that it will fit whatever…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 6

Yes, your kick sensor for your hands free liftgate will still work after installing a Class III receiver on your 2024 Toyota RAV4 XSE. I have linked an install video near the bottom of the page for our etrailer Trailer Hitch Receiver #e23ZR being…

view full answer...

Answer 7

The best hitch for a 2024 Subaru Outback is the etrailer item #e25TR. This hitch is custom fit and bolts to your Subaru with included hardware. This is a class III hitch with a 2" receiver, that has a 3,500 lbs towing capacity and a 350 lbs…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 10

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

view full answer...

Answer 11

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Will a 20 inch by 60 inch Cargo Net work on a 24 inch by 60 inch Cargo Carrier

Product Page this Question was Asked From

Continue Researching