Replacement Shroud for the Advent Air Conditioner part # ACM135C

Question

Question:

I have an Advent ACM135C and the vent cover fell off and broke . Is there a replacement I can order?

asked by: Jeff W

0

Expert Reply:

You are looking for either the Replacement Cover for Advent Air RV Air Conditioners - White part # PXXMCOVER or black part # PXXMCOVERB. These measure 30-5/8" long x 25-3/4" wide x 10-1/2" tall.

expert reply by: Randy B

0

Answer 1

I contacted the manufacturer about the correct replacement shroud for your Dometic-Duo Therm model 57908.321. The correct shroud was one that we did not carry, but I was able to get it added for you. The correct shroud for your Dometic-Duo Therm…

view full answer...

Answer 2

Based on that picture I believe you have a Coleman Mach AC unit. The LG tag is likely for a component and not for the entire AC. Using this information and the dimensions you provided the closest thing we have for a replacement is the MaxxAir…

view full answer...

Answer 3

The correct replacement cover model number for the Dometic 620412.331c shroud is the 3308046.006. The Replacement RV Air Conditioner Cover for Penguin and Dometic Air Conditioners #AT3308046006 is what you are looking for. This is the replacement…

view full answer...

Answer 4

Yes, the cover you referenced Replacement Cover for Advent Air RV Air Conditioners #PXXMCOVER will fit your Advent Air RV Air Conditioner Item #ACM150. I have attached a couple of diagrams with the dimensions for you if you would like to confirm. The…

view full answer...

Answer 5

The only way to tow a 2018 Honda CR-V FWD behind a motorhome is on a tow dolly, the Demco Kar Kaddy SS Tow Dolly part #DM9713045 is what I recommend because it has a folding designed which makes for compact storage while not in use. The tow dolly…

view full answer...

Answer 6

The correct size air conditioner for your trailer is going to depend of several factors such as square footage, ambient temperature, number of rooms, etc. However, I can say that a 30' long enclosed trailer would be best suited with two 13,500…

view full answer...

Answer 7

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 8

I agree it is the right time to upgrade to a Lithium charger/converter as not all are Lithium compatible. I recommend using the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K which is a replacement for your…

view full answer...

Answer 9

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

The part you referenced 127194TB is a double-lip seal with an inner diameter of 1.274-inches and an outer diameter of 1.983-inches. The available seal nearest to those dimensions that we offer is part #RG06-010, which is a double-lip seal sold as a…

view full answer...

Answer 12

A TCM double-lip grease seal number 127194 has an inner diameter of 1.274-inches and an outer diameter of 1.983-inches according to my research. The available grease seal nearest to those dimensions that we offer is part #RG06-010, which is a…

view full answer...