Replacement Cover for Dometic 620412.331c

Question

Question:

I have a 2010 R pod 177 with a roof top ac with out a cover. The model is 620412.331c. do you have a white cover that fits?

asked by: Brian L

0

Expert Reply:

The correct replacement cover model number for the Dometic 620412.331c shroud is the 3308046.006. The Replacement RV Air Conditioner Cover for Penguin and Dometic Air Conditioners # AT3308046006 is what you are looking for. This is the replacement cover for Penguin model 600315 or other Dometic RV air conditioning units like the one you have.

expert reply by: Robin H

0

Answer 1

Yes, the cover you referenced Replacement Cover for Advent Air RV Air Conditioners #PXXMCOVER will fit your Advent Air RV Air Conditioner Item #ACM150. I have attached a couple of diagrams with the dimensions for you if you would like to confirm. The…

view full answer...

Answer 2

The only way to know if you have a Carrier or Dometic air conditioner is by looking at your air conditioner, which can certainly be a pain as it's on top of your trailer, but that's the only way to tell what you have. That said, the Advent…

view full answer...

Answer 3

You are looking for either the Replacement Cover for Advent Air RV Air Conditioners - White part #PXXMCOVER or black part #PXXMCOVERB. These measure 30-5/8" long x 25-3/4" wide x 10-1/2" tall.

view full answer...

Answer 4

Your R-pod has a Dometic system with a low profile that is 13,500 btu. The Replacement RV Air Conditioner Cover for Penguin and Dometic Air Conditioners - White #AT3308046006 is what I believe you need for your shroud. I've linked a video to…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 9

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 10

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 11

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

view full answer...

Answer 12

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...