Wiring Harness and Brake Controller for 2009 Chevy Express Without Tow Package

Question

Question:

I recently purchased a 2009 Chevy Express 3500. This van was not wired at the factory with a towing package. I need everything electrical wise to be able to hook up a 16foot trailer with brakes to this van. I assume I will need the correct harnesss to get a 4-way and 7-way plus the controller for the brakes. You have a lot to offer on the site, and just prefer to have you give me the parts list needed so I can order correctly the first time.

asked by: Jason B

0

Expert Reply:

I'd be happy to give you a list of all the parts you need to hook up your trailer with electric brakes to your 2009 Chevy Express van. You probably do have a hitch but didn't specify it so just to be thorough I'll give you the one that fits, which is the etrailer Trailer Hitch Receiver # e98861.

As for the wiring and brake controller, here is exactly what you need:

- T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118392
- Universal Installation Kit for Trailer Brake Controller # ETBC7
- Brake EVN # TK63VR
- Brake Control Harness # 20127

This will give you all the wiring you need and a very solid value for a quality brake controller that is very effective but at a much better price than others.

I have also added links to installation videos for you on a 2009 Chevy Express van as well as some help articles I recommend taking a look at.

expert reply by: Kyle S

0

Answer 1

The installation process for the EchoHitch #EH53VR is very similar to the Curt #C11473 and Draw-Tite #24966. The hitch requires the removal of the bumper and installs behind the bumper beam on your 2020 Prius XLE. Although we do not have an…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 9

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 10

There is a trailer hitch receiver as well as a 4-way wiring harness that fit your 2022 Jeep Grand Cherokee WL; that said, we don't have any way to reference a VIN so you'll need to confirm if you do have the WL, which is the new model of…

view full answer...

Answer 11

To determine the size of the brake assemblies you need you have to measure the depth and width of the hub drum on the axle like what you see in the picture I attached. The most common size is 2-1/4 inch wide like the #T4071600-500 that you…

view full answer...

Answer 12

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...