To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Install this heavy-duty hitch on your vehicle so that you can securely tow your gooseneck trailer. Store the removable ball upside down in the hitch when you aren't towing to get complete bed access. Square ball base won't turn in hitch.
Features:
Specs:
With the B&W Turnoverball underbed gooseneck trailer hitch you get the best of both worlds. When you go to tow, the Turnoverball creates a sturdy, dependable connection with your gooseneck trailer. And when you're done towing, you can stow the ball upside down in the hitch to get full bed access and a clean appearance.
The durable steel hitch ball included with the Turnoverball system secures in the hitch with a sturdy, 5/8" thick steel pin that is incorporated into the end of the operating handle. To lock the ball in place, drop it into the hitch hole in the bed of your truck. Then rotate the handle in your driver's-side wheel well counterclockwise until the latch engages. When the latch is engaged, the spring-loaded pin on the end of the handle will be inserted all the way through the base of the hitch ball, forming a strong, solid connection and ensuring absolute security when you're towing.
When you're done towing, remove the hitch ball by simply pulling the handle out as far as it will go and then rotating it clockwise until it unlatches. Remove the ball, flip it upside down, and drop it back into the ball hole of the hitch. Then reengage the latch to secure the stowed ball in place.
Unlike typical gooseneck balls - which have round bases - the Turnoverball hitch ball is designed with a square base. This makes latching the ball in the hitch easier because the base won't rotate inside of the hitch like a round base might, so lining the pin up is a snap. The base of the ball also fits tightly within the ball hole during storage. Because only the corners of the base contact the sides of the socket, any dirt or grime that gets into the hitch will fall through the socket, thus helping to prevent any buildup that could cause the ball to seize up in the hitch.
Simple, Custom Installation
This hitch is custom designed for your vehicle. The included mounting brackets bolt to existing holes in your truck's frame. While some modification is required - you will need to cut a 4" diameter hole in your bed for the hitch ball and drill holes for the built-in safety chain loops - there is no need to weld onto or to drill into your frame.
Once you have the hitch brackets and body installed, set up the operating handle. This handle is designed to be accessed from the rear driver's-side wheel well. On the end of the handle is the heavy-duty steel pin that secures the hitch ball.
B&W makes it easy to tow just about anything. With the many adapters and accessories available, the Turnoverball can be made to work with almost any gooseneck trailer. Hitch balls are available that have a built-in rise, an offset, and even a different connection type. Add on the Companion fifth-wheel hitch - which attaches directly to the Turnoverball with no other parts required - and you can tow your fifth-wheel trailer.
Alternate Instructions
California residents: click here
Average Customer Rating: 4.8 out of 5 stars (3564 Customer Reviews)
Install this heavy-duty hitch on your vehicle so that you can securely tow your gooseneck trailer. Store the removable ball upside down in the hitch when you aren't towing to get complete bed access. Square ball base won't turn in hitch.
The hitch went in exactly like the directions said and every part was right on the hitch works great I take the ball in and out with ease very happy with the product good quality hitch
Great product, easy install.
On a 2023 Chevy 1500 Duramax, you can unbolt the rear fuel tank strap and get enough room to slide the center section in without disturbing the exhaust piping.
Fit well and works good. Does the job!!
The B&W Turnoverball underbed Gooseneck hitch was the perfect setup for my use. This new PICKUP was purchased purchased more for light duty personal and recreation use, not a work truck. That said I own two gooseneck trailers, a flat bed and a dump that I still want to use to haul from time to time. With the underbed hitch I am not restricted in anway from hauling in the bed. I actually have a rubber bed matt in the floor of box. When I use the hitch I just roll the matt forward and flip the hitch. When finish I flip it back and unroll the matt. My truck is a half ton GMC Sierra Duramax that handles my trailers with ease.
Very easy company to deal with and very very fast at delivering
Installed this in 2021 chevy silverado 1500. Clean install nice to have the bed free
Order was shipped in a timely fashion and product is what we expected.
Good product, and good instructions
I had great service and delivery was on time Thanks for your help
It was easy to install it is easy to operate and it looks nice. What more could a girl want.
The best knowledgeable place to buy a hitch . Very helpful and superior service and fast shipping!!
Amy did a great job with the order and follow up.
The B&W Goose neck Trailer Hitch is just what I needed. It was easy to install with the included directions.
Great to work with. No issues with this hitch after the first year. Easy to install.
Well satisfied!
Hitch was easy to install and works perfect. I tow a gooseneck horse trailer without any problems. I would definitely purchase another one.
Heavier than I expected. Turn over ball is ok ,but like Reese Elite's better dont like having to reach underfender to release and remove the ball To get smooth bed
Installed this in my 2020 Chevrolet Silverado 1500 Diesel. The instructions were good, it took me about 5 hours to install by myself with out a car hoist. Not bad for a 70 year old guy!!
Top notch hitch. Used it a few times now and it has worked flawlessly. Instructions on installation are clear and easy to understand.
Great product.finisded installing it in about 4 hrs.center piece took awhile to move into place because of limited space on my vehicle.once center piece went in the rest of install was easy.need to read instructions and follow makes all simple.
Best hitch
VERY INFORMATIVE - KNEW THEIR INVENTORY VERY WELL - VERY FRIENDLY
Curtis
11/10/2022
Has worked perfect, put it in myself and have had no problems!
Very durable. I installed it, myself and it went smoothly.
Great hitch
Do you have a question about this Gooseneck Hitch?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Rex
4/11/2024
Same as new. used many times with good results.