Will the Bristol Waste Valve for RV Gray Water Tanks Work With 2" Pipe

Question

Question:

Can you tell me if the grey water waste valve accepts a 2inch pipe coming from the grey tank? txs

asked by: Phil I

0

Expert Reply:

The Bristol Waste Valve for RV Gray Water Tank part # 34466N11AB is designed to attach to a 1-1/2" sewer pipe which is the standard for grey water on a trailer. In order to use this with a 2" sewer pipe which is a very uncommon size you'd need to go to the hardware store and get an adapter.

expert reply by: Conner L

0

Answer 1

The Yakima EXO Swing Away 2 Bike Rack w/ Enclosed Cargo Carrier #Y34ZR will restrict the passenger side door on your 2024 Entegra Expanse. When the arm swings out it will be sitting at that corner of the vehicle which means the door will be able to…

view full answer...

Answer 2

I'd be happy to help. We have the Command Electronics #CE44VR which is the new version of the now discontinued 003-30LEM2. The new light is the same size, but instead of having a slight dome where the diodes are on the old light, the new…

view full answer...

Answer 3

The Lasalle Bristol 66N11ABPWT has an MPT-spigot whereas the #34466N11AB has a 1-1/2" hub and spigot. There's also the color difference to help differentiate between potable and waste water. We don't currently offer potable…

view full answer...

Answer 4

The gate valve #34466N11AB96GMA should come apart without cutting the pipe once the bolts are removed. I can se that the flange is completely loose so the gasket must have gotten too hot and melted to both sides of the pipe fittings. You should be…

view full answer...

Answer 5

We do have a 3 inch diameter black water waste valve with a handle that unscrews but part #T1003VPM doesn't have a removable handle. Instead use part #34439240 from LaSalle Bristol. Additionally, use part #34466SP1112 for a 12 inch extension.

view full answer...

Answer 6

Yes, the handle for the Bristol Waste Valve Body for RV Gray Water #34439241 is threaded onto the rod so it can be removed like what you're needing.

view full answer...

Answer 7

The Bristol Waste Valve Body part #34439241 is 1/2" thick. This will work perfectly in place of the valve you have attached a photo of. The 1-1/2" opening and four bolt mounting flange are both industry standards so you won't have any…

view full answer...

Answer 8

The Seaflo Diaphragm Pump for Boats and RVs - Variable Flow, #SE96FR has connections that allow it to connect to 1/2" lines but it does not come with a PEX ready fitting. I have contacted the Vendor to discuss options and they informed me that…

view full answer...

Will the Bristol Waste Valve for RV Gray Water Tanks Work With 2" Pipe

Product Page this Question was Asked From

Continue Researching