Can Handle on Bristol Waste Valve Body for RV Gray Water be Removed

Question

Question:

Our RV uses a threaded extender rod on the 1 1/2” waste valve. Does the handle on this item unscrew from the valve body, so I can connect the extender rod?

asked by: Thomas

1

Helpful Expert Reply:

Yes, the handle for the Bristol Waste Valve Body for RV Gray Water # 34439241 is threaded onto the rod so it can be removed like what you're needing.

expert reply by: Jon G

1

Joe B.

3/8/2024

I could not remove the handle until I used a set of vice grips to hold the rod. Then the handle came off smoothly.

Reply

Jon G.

3/8/2024

@JoeB Thanks for the update! Sometimes things that are designed to be easily removable can become seized over time so I'm glad to hear that you were able to get the old handle off!

Reply

Answer 1

We do have a 3 inch diameter black water waste valve with a handle that unscrews but part #T1003VPM doesn't have a removable handle. Instead use part #34439240 from LaSalle Bristol. Additionally, use part #34466SP1112 for a 12 inch…

view full answer...

Answer 2

The Kuat Pivot 2 Swing Away Hitch Extender for Bike Racks, #PVP20B, does have a max weight of 250 lbs. When using multiple components together the lowest weight rating will determine the max of the whole.

view full answer...

Answer 3

The Bristol Waste Valve Body part #34439241 is 1/2" thick. This will work perfectly in place of the valve you have attached a photo of. The 1-1/2" opening and four bolt mounting flange are both industry standards so you…

view full answer...

Answer 4

Per specs available to me, the Parallax 7400 Series converter charger has a 55 Amp rating. The Progressive Dynamics Inteli-Power RV Converter and Smart Battery Charger, #PD9260C is a 60-Amp output and confirmed to be a valid replacement. This smart…

view full answer...

Answer 5

The gearbox and motor do not come separately therefore you will need to purchase them both together as a whole. The correct replacement motor and gearbox for your trailer with a Thompson Motor/Gearbox 7828696 is the Replacement 18:1 Tuson Motor for…

view full answer...

Answer 6

When RV holding tank sensors incorrectly read full, it is typically due to residue. Since your trailer sat for a while it's very likely there is residue of some kind on the sensors. The best way to keep your tanks sensors working correctly is…

view full answer...

Answer 7

Yes, the Double RV Waste Valves part #T80 is exactly what you need to replace the Bristol RV Waste Valves V93B15 that you have now. If you want to reuse your existing spigot flange then they will match up to those on the above as the four bolt…

view full answer...

Answer 8

I went out into our warehouse and grabbed a set of the #T1001-9VP and found that the bolt diameters are 3/16 inch exactly.

view full answer...

Answer 9

I would love to help but I do not have any information that tells me what size drain pipes are on your 2007 Keystone Passport Ultralite so you will need to measure this for yourself. The standard size is 1-1/2" for the grey water tanks and…

view full answer...

Answer 10

Yes, you can replace the 3" and 1-1/2" valves on your Bristol Double RV Waste Valves - Elbow - Rotating - 3" and 1.5" Hubs to 3" Spigot #34466ND14AAR with the Bristol Waste Valve Body for RV Gray Water w/…

view full answer...

Answer 11

The gray water tank valve on the Bristol Double RV Waste Valves part #34466ND13AAR can be replaced using the Bristol Waste Valve Body for RV Gray Water part #34439241 or the Valterra Bladex Waste Valve Body for RV Gray Water Tank part #T1001VP. If…

view full answer...

Can Handle on Bristol Waste Valve Body for RV Gray Water be Removed

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching