Hitch Installation Videos for Curt C13383 Hitch on Chrysler 2019 Pacifica Hybrid

Question

Question:

I am reading the reviews/comments for the Curt hitch C13383 which seems to be best hitch for the above referenced car. One review says that there is a video of it being installed on a 2020 pacifica hybrid but the only video on your site is for a non-hybrid. Does this video exist and if so do you know where I can find it? Also, any clarificaiton on installation of this product to the hybrid specifically for my installer would be much appreciated thanks.

asked by: Philip W

0

Expert Reply:

As of right now, we haven't had the opportunity to make a video of the installation of the Curt # C13383 on the 2020 Chrysler Pacifica Hybrid, but the process of installation for both the Hybrid and standard models are going to be exactly the same. In fact, both use the same Curt C13383 hitch. I have gone ahead and linked the installation videos for both the 2020 and 2019 Pacifica for you to use as a reference during the process.

expert reply by: Erik B

0

Answer 1

In fact there is a trailer hitch that will be a perfect fit on your 2019 Chrysler Pacifica hybrid, the Curt Trailer Hitch #C13383. The hitch has a concealed crosstube and is a bolt-on installation that will not require drilling into your…

view full answer...

Answer 2

I took a look at an online copy of the owner's manual for a 2019 Chrysler Pacifica Hybrid and it stated that towing a trailer is "not permitted" with the vehicle so it would be up to you to decide if that was a direction you wanted to…

view full answer...

Answer 3

When you install an aftermarket product on your vehicle, such as a trailer hitch, you are protected by the Magnuson-Moss Warranty Act. This act states, in part, that unless the installation of the part is specifically what caused a problem, the…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 7

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 10

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...