Correct Camper Tie-Downs for 2019 Ram 1500 Quad Cab 4x4 6.4' Bed

Question

Question:

Anchor system 2019 Ram 1500 4x4 quad cab 6ft 6 bed

asked by: Roget

0

Expert Reply:

It sounds like you are looking for a set of frame mounted camper tie-downs for a 2019 Ram 1500 Quad Cab 4x4 6.4' Bed. If that is the case then I recommend the TorkLift Custom Frame-Mounted Camper Tie-Downs part # TL78ZR for front and part # TL23RR for the rear. I also recommend the TorkLift Locking FastGun Turnbuckles for Frame-Mounted Tie-Downs part # TLS9522-2-LK.

expert reply by: Conner L

0

Answer 1

For your 2019 Ram 1500 you will need to use the TorkLift Custom Frame-Mounted Camper Tie-Downs, Front #TL78ZR and Rear #TL23RR. When Ram built the new 1500 body style they narrowed the walls of the truck bed and this has caused the HappiJac tie downs…

view full answer...

Answer 2

Currently (July 2020) only the powder coated steel TorkLift Tie-Downs #TL78ZR and #TL23RR for your 2020 Ram 1500 are available. When you can go with aluminum I do recommend it though simply because aluminum doesn't need a special coating to…

view full answer...

Answer 3

The TorkLift Custom Frame-Mounted Camper Tie-Downs #TL23RR are confirmed to fit your 2021 Ram 1500 Crew Cab with the 67" bed length as long as you do not have the Mopar rear-mounted kick out steps that are mounted under the bumper. If you also…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 8

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 9

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 10

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

view full answer...

Answer 11

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...