Slide-In Camper Tie Downs For a 2021 Ram 1500 Crew Cab with 5-1/2' Long Bed

Question

Question:

Could you please verify this item will fit my truck as your website shows? I dont want to purchase without a guaranteed fit. 2021 RAM 1500 crew cab, with 67inch bed with no running boards and factory hitch. thank you,

asked by: RICK W

0

Expert Reply:

The TorkLift Custom Frame-Mounted Camper Tie-Downs # TL23RR are confirmed to fit your 2021 Ram 1500 Crew Cab with the 67" bed length as long as you do not have the Mopar rear-mounted kick out steps that are mounted under the bumper.

If you also are in need of the front mounts they are TorkLift Custom Frame-Mounted Camper Tie-Downs # TL68ZR. These will also not fit if you have the factory flip-out steps that are mounted under the bed.

The TorkLift Locking FastGun Turnbuckles # TLS9529-2-LK will secure your slide in camper to these TorkLift Tie-Downs.

If your truck has the steps you should go with the HappiJac Truck-Mounted Camper Tie-Downs # LC236326-205221 to secure your slide in truck camper. You will want the HappiJac Qwik-Load Turnbuckles # LC182895 to hold the camper to the tie down points.

expert reply by: Bud M

0

Answer 1

Currently (July 2020) only the powder coated steel TorkLift Tie-Downs #TL78ZR and #TL23RR for your 2020 Ram 1500 are available. When you can go with aluminum I do recommend it though simply because aluminum doesn't need a special coating to…

view full answer...

Answer 2

It sounds like you are looking for a set of frame mounted camper tie-downs for a 2019 Ram 1500 Quad Cab 4x4 6.4' Bed. If that is the case then I recommend the TorkLift Custom Frame-Mounted Camper Tie-Downs part #TL78ZR for front and part…

view full answer...

Answer 3

For your 2019 Ram 1500 you will need to use the TorkLift Custom Frame-Mounted Camper Tie-Downs, Front #TL78ZR and Rear #TL23RR. When Ram built the new 1500 body style they narrowed the walls of the truck bed and this has caused the HappiJac tie…

view full answer...

Answer 4

To use the Torklift Turnbuckles part #TLS9522 that you have you do not also need the #TLS9000. These kits essentially do the same thing and both would not be required.

view full answer...

Answer 5

Yes, your local installer was correct that you'll need the TorkLift Custom Frame-Mounted Camper Tie-Downs - Front #TL78ZR and TorkLift Custom Frame-Mounted Camper Tie-Downs - Rear #TL23RR. I do want to note that these will not be compatible…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 12

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Slide-In Camper Tie Downs For a 2021 Ram 1500 Crew Cab with 5-1/2' Long Bed

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching