Does Trailer Hitch for 2020 Hyundai Palisade Require Bumper Cutting.

Question

Question:

I have a 2020 Hyundai Palisade and tried to get a hitch installed at Uhaul today, they told me they could not do it unless they cut the bumper. Is this the case for any of the hitched you have in stock? I am local and would set up an installation with you guys.

asked by: Richard W

0

Expert Reply:

We do carry hitches that fit your 2020 Hyundai Palisade that don't require any bumper cutting. My guess is the place you took it is installing the hitch for the Kia Telluride, part # C13420, which has a very similar design but isn't the correct hitch for your Palisade.

Instead you want either Curt # C13427 or etrailer # e95ZR.

I recommend the Curt because their powder coat tends to hold up longer and the welds are generally stronger. There is a trim piece that needs to be removed from the Palisade during the install but it's put back on after the hitch is in place.

expert reply by: Charles S

0

Answer 1

When installing The etrailer Hitch #e95ZR onto your 2023 Hyundai Palisade, it does require some fascia trimming but it is not too bad. When looking at the instructions box 3 while using a tape measure, marker, and utility knife measure, mark, and…

view full answer...

Answer 2

The etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" #e95ZR does not require any trimming or modification to your bumper molding or fascia. You will, however, need to remove the passenger side plastic molding…

view full answer...

Answer 3

The 2021 Kia Telluride and Hyundai Palisade are sister vehicles, if you will. They have some differences but as far as choosing a hitch and trailer wiring and installing them is concerned, the installs would be identical. For a hitch, I'd…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 7

We have both a trailer hitch receiver as well as the wiring you need for your 2024 Hyundai Palisade. I verified both fits directly with the manufacturer for you, and the correct parts are the following: - Curt Trailer Hitch Receiver #C13427 -…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 10

Item #118701 does not fit a 2023 Hyundai Palisade but I have one that does. It is the Curt T-Connector Vehicle Wiring Harness item #C43FV. This custom-fit T-connector plugs into your Palisade's wiring harness, which is located behind the tail…

view full answer...

Answer 11

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 12

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...