Will the Buyers Products Hitch Plate Fit a Ford Super Duty Dump Truck

Question

Question:

I have a 1993 F super duty with a 12foot dump bed. I need a trailer hitch to pull my 18foot trailer will the # 3371809061A plate fit my truck?

asked by: Neal

1

Helpful Expert Reply:

The Buyers Products Hitch Plate part # 3371809061A is a universal weld/bolt-on hitch plate. That said, the dimensions are geared towards Ford F-350/450/550 trucks so if this is what you have it would be a great option.

expert reply by: Conner L

1

Haden

7/20/2020

Do y’all have one that will fit a big semi like a t600 kenworth? Please email me how to get a hold of someone.

Reply

Chris R.

7/26/2020

I don't believe we have any custom options for a bigger truck like that, however we do have a number of universal, weld-on options that could work really well. I've linked our full selection below.

Helpful Links

dept-pg-heavy_duty_truck_hitch.aspx

Reply

Answer 1

The size of the bolts you'll end up using with the Buyers Products Hitch Plate part #3371809061A will depend on the application which is why they are not included or recommended. The other option is that you can have the hitch plate welded in…

view full answer...

Answer 2

You are correct, you should only be getting output when the brake is applied, or the override switch is activated. It sounds like the controller might be bad, but to make sure, you should probably bench test it before tossing it. Use a circuit…

view full answer...

Answer 3

The hitch opening of the Buyers Products Hitch Plate with 2-1/2" Receiver Tube #3371809061A is up higher than the very bottom of the plate so it would work for you I believe since you don't want something that sits lower.

view full answer...

Answer 4

If your 2000 Ford F-350 dually is a cab and chassis model that has a frame width of 34 inches measured from outside to outside yes the Buyers Products Hitch Plate #3371809061A would fit and work well as that's what it was designed to fit.

view full answer...

Answer 5

I would be happy to help, but there is not a plug and play vehicle wiring harness available for your 1995 Ford F-Series Super Duty Cab and Chassis. If you are needing a 4-way connector we have the Curt #C58044 which will work for you though you will…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 9

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 10

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 11

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 12

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Will the Buyers Products Hitch Plate Fit a Ford Super Duty Dump Truck

Product Page this Question was Asked From

Continue Researching