Does Yakima Holdup 2 Bike Hitch Add On Fit Older Version of Yakima Holdup

Question

Question:

On July 2010, I purchased the Yakima Holdup 2 #02433. The spine color is grey. I now wish to purchase the add-on to increase my Holdup’s capacity from 2 to 4 bikes. Is model number Y02446 the correct Holdup+2 model to fit my 2010 Yakima Holdup?

asked by: Ruben

1

Helpful Expert Reply:

Yes, I confirmed with Yakima that the expansion kit part # Y02446 does fit your earlier version of the Holdup # 02433.

expert reply by: Jameson C

1

Answer 1

The HoldUp has 3 generations. The first 2 were gray. I checked with Yakima and the extension, #Y02446, for the current generation black HoldUp is retro-compatible with the HoldUp (2009) 8002433 model. This is the version that only fits 2 inch…

view full answer...

Answer 2

If you have the Yakima HoldUp Bike Rack part #Y02443 or the Yakima HoldUp EVO Bike Rack part #Y02479 then yes, you can use the 2-Bike Add-On for Yakima HoldUp part #Y02446 or the 2-Bike Add-On for Yakima HoldUp EVO part #Y02482 to carry an additional…

view full answer...

Answer 3

Yes, you can use Replacement Mounting Hardware part #Y8880128 to secure your Hold Up Plus 2 extension #Y02446 to your existing HoldUp platform carrier.

view full answer...

Answer 4

The Yakima HoldUp 2 Bike Rack for 2" Hitches - Platform Style - Tilting #Y02443 is different from the Yakima HoldUp EVO 2 Bike #Y02479 in a couple ways. The original could hold bikes up to 60 lbs each versus the EVO holding up to 50 lbs per…

view full answer...

Answer 5

There's two different versions of the Yakima HoldUp, the #Y02445 and the EVO #Y02479. If you have the standard model #Y02445 then there isn't a compatible add-on to increase the capacity to 4 bikes. The EVO model #Y02479 has the add-on…

view full answer...

Answer 6

We do have the correct part for you, but the 8880833 is only a fit for the Yakima HoldUp EVO Bike Rack , as opposed to the standard Yakima HoldUp bike rack. Based on your photo, you do not have the EVO, you have the standard HoldUp. The arms are not…

view full answer...

Answer 7

The differences between the Yakima HoldUp #Y02443-2 and the HoldUp EVO #Y02479-2 include an integrated SpeedKnob to take out movement of the bike rack, an easier system for tilting the bike rack, and the ability to add fat bike tires (up to 5"…

view full answer...

Answer 8

Yes, the Fan-Tastic Vent Roof Vent #FV803350 has a rain sensor that will close when it rains or snows but then re-open once it dries. The fan will also automatically re-start once the dome has opened.

view full answer...

Answer 9

We have a very similar Fan-Tastic roof vent to the #FV801250 that does have a rain sensor, but this one does not. Since this is a manual lift lid there'd be no way to automatically close the lid if rain was sensed. So instead you'd want the…

view full answer...

Answer 10

Fan-Tastic does not offer replacement circuit boards for their roof vents. We used to have an upgrade kit that fit your specific roof vent so best option would be to replace the entire vent with part #FV803350.

view full answer...

Answer 11

Drilling a hole in your hitch receiver will void your manufacturer's warranty if something were ever to go wrong with it. For that reason, I think the best solution to use an anti-rattle hitch pin that won't require any drilling, like the…

view full answer...

Answer 12

First thing you will want to check is that the fan has power and is grounding properly. You can try using jumper wires to the vent wiring that are run to known ground and power to see if that works. Next, you can check the fuse of the fan to make…

view full answer...