Mounting Brackets for Fulton Plastic Trailer Fender # F008585

Question

Question:

Forgot to add, what is the part number or web link for the mounting hardware needed to install this fender? How many do you need for each fender? Also weight listed is 300 pounds. Is this the maximum weight for anyone standing on this fender? Please know I dont intend on standing on fender and Im not that large.

asked by: Lyn K

0

Expert Reply:

The Fulton trailer fenders do not come with mounting hardware. If you have hardware from previous fenders, you can re-use it or get some L-brackets like # CE26098G-2. The capacity is the max the fender can hold whether it be a person standing on it of if you were to place something on it temporarily.

expert reply by: Michael H

0

Answer 1

The fender that you referenced, the Fulton Single Axle Trailer Fender #F008585, will allow for a 15 inch wheel. The fender measures 45 inches long x 10 -1/4 inches wide and 14-7/8 tall. After converting your metric tire size to inches, 9-3/16 inches…

view full answer...

Answer 2

The Fulton Single Axle Trailer Fender part #F008584 and CE Smith Single Axle Trailer Fender part #CE19504 are both excellent replacement trailer fender options. Unfortunately, we cannot confirm fit on any one particular make/model. They are designed…

view full answer...

Answer 3

Yes the brackets part #CE26098G-2 are compatible with the Jeep Style Fender part #HP49VR. We do not offer the bolts, nuts, and washers though so you'd need to source that locally.

view full answer...

Answer 4

The Fulton Plastic Fender with Top Step, part #F008553, does not come with mounting hardware. Fulton does not provide mounting bracket kits for the fenders. You can use your fenders original mounting brackets or use the Redline Galvanized Steel,…

view full answer...

Answer 5

Yes! The Fulton #F008585-2 is compatible with the Galvanized Steel, U-Shaped, Bolt-On Brackets #PF1135-BKT-2 I've attached a helpful image that details the distances between the holes on this bracket. FYI, these brackets are a universal product.…

view full answer...

Answer 6

I was able to go out to the warehouse and measure the mounting brackets holes for the PF11X35W and found that it was 5-5/16 inches or 5.3125 inches. If these aren't an exact match, new holes can usually be drilled into the brackets to make them…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 9

Load range B trailer tires are going to have a lower capacity than C load range tires. Basically that, psi rating, and the ply rating are the only differences. A higher load range tire would last a little longer than lower load ranges of the same…

view full answer...

Answer 10

You can add larger wheels and tires to a trailer as long as you have enough room for the larger size. The main clearance issues we find when putting larger tires and wheels on a trailer is from the top of the tire to the fender and from the inside…

view full answer...

Answer 11

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 12

To find the load capacity for your axle you should look on the trailer VIN plate or sticker that lists the VIN number. The weight rating of the axle should be listed on that same plate or sticker. Also, the axle could have a tag or plate on it that…

view full answer...