Does Dexter Single Axle Heavy Duty Suspension Kit # K71-403-00 Have Zinc Plating

Question

Question:

Is this hardware kit bare steel, or does it have a plated / painted / galvanized / zinc coating for marine use ?

asked by: Jack C

0

Expert Reply:

All of the components of the Dexter Single Axle Heavy Duty Suspension Kit # K71-403-00 are zinc plated which is great for marine applications.

expert reply by: Jameson C

0

Answer 1

Based on your images it does appear your trailer was built to have double eye springs rather than a slipper spring. For this you will need to measure your current mounts from bolt hole center to bolt hole center. We have the 3,500LB leaf springs…

view full answer...

Answer 2

I went out to our warehouse and measured the Dexter Heavy Duty Suspension Upgrade Kit for Single Axle Trailers part #K71-358-00 for you. The dimension for the shackle kit are as follows: The distance between the top and bottom steel brackets is…

view full answer...

Answer 3

We can get you the right shackle kit for your single axle trailer with a Dexter 3,500 lb axle, and you can choose from either a standard kit or an upgrade kit. Either will work, though the Upgrade Kit is going to be the best option due to the fact it…

view full answer...

Answer 4

For a single axle trailer, you want the shackle strap to be able to move so that you have the spring deflection needed for your suspension. Angled like the photo or even almost vertical is fine you just don't want the shackle strap to bind and…

view full answer...

Answer 5

When picking out new trailer leaf springs it is important to closely match their length with your existing sets. Leaf springs will definitely stretch/lengthen a bit over time (around an inch or so at most) but the 20-3/8 inch long 3-Leaf Double-Eye…

view full answer...

Answer 6

There typically aren't any part numbers stamped onto the trailer spindle that can be used for identification. There are however numbers stamped onto the hub most times which can be used for identification. The TDE46210 tells me you have a 3,500…

view full answer...

Answer 7

The orientation of the 26" 4-Leaf Double-Eye Spring for 4,000-lb Trailer Axles #e22YR you have installed on your trailer looks just fine to me! You're correct that you want some angle for the shackles to help account for some flex in the…

view full answer...

Answer 8

You don't necessarily need to remove your wheel to measure your springs but you definitely need to take the weight off of them. If you're able to jack up the frame of your trailer high enough that the tires are suspended (even if it's…

view full answer...

Answer 9

The 26" Long 4-Leaf Double-Eye Spring for 4,000-lb Trailer Axles #e22YR will work great as a replacement for your Dexter Axle Leaf Spring 072-022-00. This is rated for a slightly higher weight rating but it isn't too much higher so you…

view full answer...

Answer 10

I would be happy to help you find the correct replacement slipper spring for your 1998 McClain Trailer with a 2000lb capacity, but we do not have a spring that is 26-1/2' long with a 2000lb rating or anywhere close. I recommend making sure you…

view full answer...

Answer 11

Smart idea to get ahead of the problem, and there is a good upgrade for your Tracker boat trailer with a 3,500 lb axle. Since your current spring measures 26-1/4 inches from center of one spring eye to the center of your other spring eye, a 26 inch…

view full answer...

Answer 12

It sounds like you're needing the 4-Leaf Double-Eye Spring for 4,000-lb Trailer Axles #e48SR along with the CE Smith U-Bolt Kit for Mounting 2" Square Trailer Axles #CE23103. The leaf spring measures 26" long center eye to center eye…

view full answer...

Does Dexter Single Axle Heavy Duty Suspension Kit # K71-403-00 Have Zinc Plating

Product Page this Question was Asked From

Continue Researching