Class V Curt Hitch that Fits 2004 GMC Yukon XL 2500

Question

Question:

I have a 2004 GMC Yukon XL 2500 Will this work on my 2500?

asked by: Adam

0

Expert Reply:

Yes, Curt has confirmed for us that their hitch part # C15324 that you referenced is a fit for your 2004 GMC Yukon XL.

expert reply by: Jameson C

0

Answer 1

The highest capacity 2-inch hitch we offer for this vehicle is the Curt Class V Receiver Hitch #C15324. This bolt-on no-drill hitch is rated for 16K towing and 17K towing with weight distribution. There are no 5th wheel installation kits for the 2004…

view full answer...

Answer 2

I'm not exactly sure between which points you want the measurement taken of the Curt hitch, part #C15324, so I took a few. On the mounting plates, outside to outside is 41 inches, inside to inside is 36-1/2 inches, and the bolt holes are 39-11/16…

view full answer...

Answer 3

The towing capacity of a 2004 GMC Yukon XL can vary from 5,700 lbs to 12,000 lbs depending on options so be sure to check the owner's manual for the exact capacity. That said, if the towing capacity exceeds the loaded weight of the trailer then…

view full answer...

Answer 4

We currently only have a Class III or Class V hitch for the 2004 GMC Yukon. The Curt Trailer Hitch Receiver Item #C15324 you were looking is confirmed to fit all models of the 2004 GMC Yukon so you shouldn't have any issues with your Denali…

view full answer...

Answer 5

Here is a Class IV hitch #e98861 that will fit your 2019 Chevrolet Express van. We even have an installation video for you!

view full answer...

Answer 6

The Curt #C15320 that you referenced should fit your 2006 GMC Savana with a Knapheide Body if your mounting holes have a 40 inch center. Although the outside measurement is relevant, the more important measurement is the mounting hole center to…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 10

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 11

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 12

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...