Thule Roof Rack Components that Fit Leer Roof Rack Channels

Question

Question:

I bought a used a leer cap for my track that has rails installed - the previous owner said they were factory installed. I have quite a few Thule pieces from prior vehicles including a set of feet and TK1 kit. According to what I can find, these should fit the factory rails. However, the opening on the rails is only about 3/8 in and the spacers on the TK1 are 1/2 in. Are they other spacers to use for these feet? Or do I need a different kit?

asked by: John

0

Expert Reply:

The challenging aspect of your scenario is that you have quite a bit of Thule parts that could be put together to make a roof rack that should fit your channels but since Thule recently redesigned their roof racks the parts you have now are not longer supported.

So we really can only help you with the new style of rack that uses the podium feet part # TH460R, the fit kit part # THKIT3101, and crossbars like the # TH712500 which is a combination we know fits the Leer roof rack channels.

expert reply by: Jameson C

0

Answer 1

If your existing hub is ha a 5-on 4-1/2 inch bolt circle and uses the LM67048 inner and LM11949 outer bearing, the #DX22XR hub would indeed be the correct replacement for you. To determine shipping costs, add the product to a cart then input your…

view full answer...

Answer 2

I do have an option for you but the photo you attached is a of a Thule Tracker FootBase which have since been discontinued. There are no longer parts available to use the Thule Tracker FootBase but you can still reuse the tracks you already have…

view full answer...

Answer 3

The best product we have for wiring third brake lights in a camper shell is the 3rd Brake Light Logic Module part #PP20-702. If you were to combine this with an in-bed wiring harness such as the Curt 5th Wheel/Gooseneck Custom Wiring Harness part…

view full answer...

Answer 4

I spoke to my Yakima contact and he informed me that you will need the Landing Pad 1 #Y00221 for the tracks on your Leer camper. To complete your roof rack setup you will need: quantity 2 of the Landing Pad 1 #Y00221 quantity 4 of the Control Towers…

view full answer...

Answer 5

The Rhino-Rack RTC-Style Roof Rack Tracks will work with the Camper shell to give you the compatible tracks. There are different lengths available and you can cut them down if needed: Rhino-Rack RTC-Style Roof Rack Tracks - 31-1/4" Long…

view full answer...

Answer 6

Tracks can absolutely be installed on the roof of your A.R.E. Truck Cap to provide a mounting system for a roof rack. For this I recommend the Yakima Tracks, which come in 42 inch #Y01126, 54 inch #Y01127, and 60 inch #Y01135 lengths. These tracks…

view full answer...

Answer 7

There are roof racks available that you will be able to install on your Leer camper. There are no special mounting brackets needed, but you will need to install tracks that the roof rack feet will sit in, and the crossbars will then attach to the…

view full answer...

Answer 8

There are some similar systems to the Rhino Rack #Y01-140B, but they're all going to be rated similarly and I generally believe that Rhino Rack makes some of the best products in terms of durability, so that would be the system I recommend going…

view full answer...

Answer 9

Yes, the Rapid Podium Feet for Thule Crossbars - Fixed Point - Qty 4 #TH460R will allow you to attach aero-style Thule crossbars on top of your Leer topper with Thule tracks. The Rapid Podium Feet will fit right into the tracks. If you need a…

view full answer...

Answer 10

If they are using Anchor Plates like part #Y8810074 directly to their solar panel then I'm not sure. I would imagine that it has to do with the design of the solar panel. These anchor plates were made specifically for Yakima complete roof rack…

view full answer...

Answer 11

Yes the Inno Square Crossbars part #INB137 are the same 7/8" tall and 1 1/4" wide as what the original Thule Square bars were. They will work with the older Thule Foot Packs for square bars like part #TH450. As you know they are a pass…

view full answer...

Answer 12

Thule's TK-1 Kit has been discontinued, but is mostly available as its component parts. I've listed what we have below with the number of each part needed to complete a single bar kit. Base, #753-2149 (2 needed total) Bolt #924-0617-15 (2…

view full answer...