Hub for 2500 Lb Axle Using LM67048 and LM 11949 Bearings

Question

Question:

LM11949 and LM67048 is the 2 bearings i took out .So the hub that uses them would be the same as this one. Trailer Hub Assembly for 2,500-lb Axles - 5 on 4-1/2 - Cast.? And if so what would it cost to have them shipped to North bay Ontario ?

asked by: Dwayne

0

Expert Reply:

If your existing hub is ha a 5-on 4-1/2 inch bolt circle and uses the LM67048 inner and LM11949 outer bearing, the # DX22XR hub would indeed be the correct replacement for you.

To determine shipping costs, add the product to a cart then input your zip/postal code. The various sipping methods and their related costs will appear.

expert reply by: Mike L

0

Answer 1

Thank you for that info and we do have a replacement for the Titan hub 17214. That hub is for 2,500 lb axles, uses inner bearing LM67048 and outer bearing LM11949; the correct replacement for that is the following: - Dexter Trailer Idler Hub Assembly…

view full answer...

Answer 2

The only trailer hub with a 5 on 4-1/2" bolt pattern, and inner bearing with a 1.250" inner diameter (bearing LM67048) and outer bearing with a 0.750" inner diameter (bearing LM11949) is the following from Dexter: - Dexter Trailer…

view full answer...

Answer 3

We currently only have one hub for your application with the bearings you mentioned. It is the Trailer Hub Assembly for 2,500-lb Axles - 5 on 4-1/2 - Cast #DX22XR. We do not have any EZ lube grease caps compatible with the covers of this hub, but…

view full answer...

Answer 4

We have a hub that fits your spindle but the bolt pattern is different. The part #DX22XR matches your bearing numbers but it's bolt pattern is the more common 5 on 4-1/2 inch. You'll have a much easier time finding wheel/tires to fit this hub…

view full answer...

Answer 5

I can't find any info on the hub part number you listed but we can still help you pick out the correct hub for you trailer. In order to pick out the correct hub assembly for a trailer you are going to need know a few key pieces of information.…

view full answer...

Answer 6

The hub part #DX22XR matches the bearing numbers of your old hub so they will fit and work well.

view full answer...

Answer 7

We can't determine what bearings and race you have based on a serial number. If they are in fact 2500 lb axles, that significantly narrows down our options. You will want to check the bearing numbers on the face of the inner and outer bearing of…

view full answer...

Answer 8

If you give me the tapered spindle measurements like in the attached photo, I can help you get the replacement hubs you need. I need the measurements at letter B where the seal sits, letter C where the inner bearing rides, and letter D where the…

view full answer...

Answer 9

A bearing with a 0.75" inner diameter is LM11949 and a bearing with a 1.25" inner diameter is LM67048, and we don't have a hub with a 6 on 5-1/2" bolt pattern. For a hub with a LM11949 outer bearing and LM67048 inner bearing, the…

view full answer...

Answer 10

I do have some options for you but we only offer two trailer hubs with these dimensions, the Dexter Trailer Idler Hub Assembly part #DX22XR which has a 5 on 4-1/2" bolt pattern and the Trailer Hub Assembly part #AH15450ECOMP which has a 4 on…

view full answer...

Answer 11

The trailer hub part #DX22XR uses both bearing numbers you mentions of LM67048 and LM11949 and has a bolt pattern of 5 on 4-1/2 inch so it will fit. The bolt pattern would be different though so you'd need to find a new wheel and tire. I attached…

view full answer...

Answer 12

We do have a hub that is compatible with a 12 inch wheel and has a 5 on 4-1/2 inch bolt pattern. The Trailer Idler Hub Assembly for 2,500-lb Axles #DX22XR does have the outer bearing #LM11949 which has the 0.750 measurement that you took but you will…

view full answer...

Hub for 2500 Lb Axle Using LM67048 and LM 11949 Bearings

Product Page this Question was Asked From

Continue Researching