How To Add Crossbars To a Leer Camper Shell with Tracks/Rails Installed

Question

Question:

Bought a leer camper with roof rails and part of foot mounts.which mounts and parts will I need to install fishing rod,ski. / snowboard holder.pic of foot thanks

asked by: Chris B

0

Expert Reply:

I do have an option for you but the photo you attached is a of a Thule Tracker FootBase which have since been discontinued. There are no longer parts available to use the Thule Tracker FootBase but you can still reuse the tracks you already have installed. I recommend the Rhino-Rack Roof Rack for Factory Tracks part # Y02-480B-NT as this is one of the most cost effective systems we have that will work with your tracks.

For a ski/fishing rod holder, I recommend the Rhino-Rack Ski and Fishing Rod Carrier part # RR572 which will hold up to two pairs of skis or four fishing rods.

expert reply by: Conner L

0

click to enlarge

Answer 1

Yes, the Rhino-Rack Roof Rack for Factory Tracks - 2 Vortex Aero Crossbars - Black - 54" Long, part #Y02-480B-NT, will fit the tracks on your Leer topper. I have included a product description link below.

view full answer...

Answer 2

For a set of 54 inch Rhino Rack aero crossbars that fit the ARE camper shell tracks of your 2020 Ford F-150 with the part #Y02-480B-NT.

view full answer...

Answer 3

Thank you for the details! The Rhino-Rack Roof Rack for Factory Tracks #Y02-480B-NT are exactly what you're looking for to fit the ARE topper tracks on your 2020 Chevy Colorado. These fit directly to your tracks, are more cost-effective…

view full answer...

Answer 4

There is no preferred crossbar spread listed for the paddleboard carriers we offer. They do however list the minimum crossbar spread at 24-inches. This is the minimum distance needed for part #TH811XT and #Y04075. Both carriers have weight…

view full answer...

Answer 5

The Rhino-Rack Sunseeker awning, part #RR32133, does require crossbars or the Rhino-Rack Pioneer platform, all of which are linked, to mount on your roof. It does install into the channel on a crossbars that have one, which many do, but not directly…

view full answer...

Answer 6

The Thule fit kit part #THKIT3101 fits the Leer camper shell roof tracks which would allow you to use the Thule feet part #TH460R. Then you can use bars like the 60 inch #TH711520 for an aero bar or #TH712500 for square.

view full answer...

Answer 7

Tracks can absolutely be installed on the roof of your A.R.E. Truck Cap to provide a mounting system for a roof rack. For this I recommend the Yakima Tracks, which come in 42 inch #Y01126, 54 inch #Y01127, and 60 inch #Y01135 lengths. These tracks…

view full answer...

Answer 8

The Thule feet for square crossbars part #INXP are a direct fit for the tracks of camper shells like what is commonly found on ARE or Leer campers shells. Or you could use 42 inch long tracks like the part #THTP42.

view full answer...

Answer 9

To replace the broken foot base from your Thule Tracker Roof Rack you will just need the part #753-2149. This includes 1 foot base that will install with the track on your original kit.

view full answer...

Answer 10

The towing capacity of the bumper on your 2014 Toyota Tacoma assuming you have the cutout will vary from 3,300 - 3,500 lbs depending on options. I advise you to take a look starting at page 228 of your owner's manual to see these options.…

view full answer...

Answer 11

On your 2014 Chevy Silverado, there are a couple of options to connect your Truck Cap stop light to your truck. The CHMSL (center high mount stop light) on your truck is one location where you can tap into the wires with Quick Splice Wire Connector…

view full answer...

Answer 12

Yes. You will need to use everything included with the Rhino-Rack Roof Rack for Thule and Yakima Tracks - 2 Heavy-Duty Crossbars - Black - 65" #Y01-140B-NT to install into the tracks you have pictured. The bases of the legs mount right into the…

view full answer...