Trailer Hitch for a 2020 Honda Odyssey with the Best Ground Clearance

Question

Question:

I need a 2 inch hitch for my 2020 Odyssey. Which one sits the highest from the ground?

asked by: William H

0

Expert Reply:

We carry three 2 inch trailer hitches that fit the 2020 Honda Odyssey: Curt # C64NR, a Curt # C13370, and one from us # E98855. All of them are basically the same design except for the Curt # C64NR. When we installed it on a 2018 Odyssey it was an inch higher than the other hitches, which were the same.

I recommend the etrailer.com hitch, # e98855. Since they're all very similar and this one has the matte finish over the glossy black of most hitches it is my choice.

expert reply by: Randy B

0

Answer 1

There is some trimming of the fascia required when installing on your 2020 Honda Odyssey when you are installing the Curt Trailer Hitch Receiver #C64NR. The only trimming required is a 1.75" x4" section of the bottom appearance…

view full answer...

Answer 2

For your 2018 Honda Odyssey, I definitely recommend going with the etrailer Class III Round Tube Hitch #e98855. This particular trailer hitch has an estimated installation time for somebody with some experience of around 30 minutes. We rate the…

view full answer...

Answer 3

Powered trailer wiring harnesses are not tested or rated for any alternate installation method. Installing it by attaching the power wire to a power outlet 12 volt wire will void the warranty. Also many times those outlets are not the only…

view full answer...

Answer 4

When determining the amount of rise/drop ball mount you'd need the two dimensions you need are the distance from the top of the hitch opening to the ground and from the bottom of the trailer coupler when it's sitting level. The…

view full answer...

Answer 5

The biggest difference between the Curt Trailer Hitches, #C64NR and the etrailer #e98855, is the #C64NR hitch sits up closer to the bumper which will give you a little more clearance between the bottom of the hitch and the ground. The Curt #C64NR…

view full answer...

Answer 6

The hitch and wiring kits for a 2019 Honda Odyssey are the same as the 2018 models. The etrailer.com hitch part #E95588 is a fit for either. The other hitch I would recommend though is the Curt part #C64NR as only the hitch opening will hang below…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 12

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...