Trailer Wiring Harness Installation - 2015 Toyota Tacoma Video

You will still be able to use the trailer with the 4-Way after installing the 4 to 5-Way adapter, #20036. First, you could just remove the adapter if you wanted to and then plug in the 4-Way like normal while stowing the adapter in the truck. The…

The 5th wire on a 5-Way flat connector is intended to connect to the vehicle's reverse light circuit. This is for the exact situation you described, so the 5th wire can signal a surge coupler's electric reverse lockout. If you need a…

The 5,000 lb tow weight rating is definitely enough to safely tow a car trailer weighing in at 4,600 lbs total. The only time I would be nervous about the weight difference is if it was under 100 lbs in your situation. According to my research the…

We recommend that all trailer tires be inflated to the max psi stated on the sidewall of the tire. If the tire is under inflated, the weight capacity is lowered to an unknown amount for that tire. Although running lower air pressures can improve the…

Since the Dexter Electric Trailer Brake Kit - 7" - Left and Right Hand Assemblies - 2,000 lbs #23-47-48 is what NuCamp installed on your trailer, it is what you want to use for a replacement on your 2018 NuCamp TaG XL Outback. The size of the…

We do offer the Westin MAX Winch Mounting Tray - Black Powder Coated Steel #46-21605 which is a direct fit for your 2009 Toyota Tacoma. The Westin MAX Winch Mounting Tray is designed to fit most winches rated 8,000 to 12,000 pounds such as #CU856333.…

It sounds like you have a 6-way trailer connector on your trailer. Either that or a 7-way. If it looks like the picture with 6 round pin holes you have a 6-way. If it's a 7-way it will look like the second picture with the 6 "blades"…

It sounds like your 2014 Toyota Tacoma did not come with a factory tow package. What can happen sometimes is that on models that did not come with the factory tow package not all of the wiring or contacts will be present. You would either need to by…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

Starting with the trailer hitch, the Draw-Tite Max-Frame Trailer Hitch Receiver #75236 referenced in your question will indeed fit your 2011 Toyota Tacoma PreRunner and is the exact hitch I would recommend. This Class III trailer hitch will use…

Electric brakes have 2 wires located at the back. One is for power and the other is for ground (it doesn't matter which is used for which function). The ground wires should be connected to the trailer frame. The only other place that would carry…

I attached a help article that covers the entire process of installing a brake controller in a 2007 Chevy Silverado with an integrated brake controller. Basically you will wire the P3 part #90195 to the wire bundle that is under the dash near the…