Does Installing a Hitch on the 2003 Lexus LX 470 Require Relocating the 7 Way Connector
Question:
I have two more questions about fitment. I see some mixed information in the comments and questions about whether this will fit with my spare tire and whether I will have to modify my 7-pin wiring hookup. I have a 32.5 tire in the stock tire location. Will the hitch interfere with my spare? My truck has the factory 7-pin trailer wiring. Will the draw-tite require me to remove/modify the factory wiring?
asked by: Josh
Expert Reply:
Yes. You will have to remove and relocate the 7way connection on your 2003 Lexus LX 470 in order to install the Draw-Tite # 75095 since it will install in the same location. You can likely use some self tapping screws and the Mounting Bracket for 7-Way # 18138 to attach your existing bracket to the newly installed hitch, or you can fabricate something on your own.
When it comes to the spare tire, as long as your tires are not larger than the tires that came stock on the vehicle, this shouldn't be an issue since it was designed for a vehicle with an under-mounted spare. However, if your tires are slightly larger than the original 275/60/r18 tires that came on the 2003 Lexus LX470 (31") you may have some difficulty storing the spare tire in that location with a hitch installed.
Because of this, the Curt # 13443 might be a better solution and will likely provide you with a bit of extra clearance for your spare tire since it's got a straight cross-tube that would allow for your slightly larger than stock tires.
Products Referenced in This Question
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 500 lbs TW
- 5000 lbs GTW
- 6000 lbs WD GTW
- 2 Inch Hitch
- 600 lbs WD TW
- Visible Cross Tube
- CURT
more information >
Product Page this Question was Asked From
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 500 lbs TW
- 5000 lbs GTW
- 6000 lbs WD GTW
- 2 Inch Hitch
- 750 lbs WD TW
- Visible Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: Trailer Hitch
- Shop: Trailer Wiring
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Video: Trailer Wiring Harness Installation - 2018 Dodge Durango
- Video: Trailer Wiring Harness Installation - 2018 Dodge Durango C55515
- Shop: Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector
- Shop: T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Search Results: 2923
- Search Results: 40090
- Search Results: 45155
- Search Results: 45050
- Search Results: 45090
- Search Results: 40030
- Search Results: 45030
- Shop: Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Video: Trailer Hitch Installation - 2001 Toyota RAV4 - Curt
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Video: Trailer Hitch Installation - 1999 Lexus LX 470 - Draw-Tite
- Shop: T-One Vehicle Wiring Harness for Factory Tow Package - 7-Way Trailer Connector
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Video: Curt Trailer Hitch Installation - 2019 Chevrolet Silverado 1500
- Video: Trailer Wiring Harness Installation - 2012 Hyundai Santa Fe
- Video: Curt T-Connector Vehicle Wiring Harness Installation - 2018 Jeep Grand Cherokee C55774
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Shop: Brake Controller
- Article: My Trailer Hitch Doesn't Fit
- Q&A: Recommended Hitch for a 2024 Toyota Grand Highlander
on Trailer Hitch
