Fit of CE Smith Winch Stand # CE31013G on 2 Inch Wide Trailer Tongue

Question

Question:

My tongue is 2inch wide by 4inch deep. Will part # CE31013PG fit?

asked by: Roger

0

Expert Reply:

The CE Smith Winch Stand you mentioned, part # CE31013PG is designed for 2 inch wide trailer frame members. The stand would fit and work well on your 2 inch wide by 4 inch deep trailer tongue.

expert reply by: Mike L

0

Answer 1

To mount the CE Smith Winch Stand #CE31013G on a trailer requires you to slip the lower portion with the holes drilled through it over the pole tongue of your trailer. The various holes are there to allow you to match the correct height and angle…

view full answer...

Answer 2

I included a winch that will be very comparable to what comes on the CE Smith Multi Sport Plus Boat and Kayak Trailer #CE48870, but we do not have that exact model. I should also mention that there is no hardware included in this list, but everything…

view full answer...

Answer 3

I went out to our warehouse to take a look at the Dutton-Lainson Hand Winch - 1,100 Pounds #DL15103 referenced in your question. I was able to take the measurements you are needing and have attached an image with these dimensions labeled that you can…

view full answer...

Answer 4

Yes, the Buyers Products Trailer Hand Winch - 800 lbs #337HW800S has a ratchet and free spool function. The linked video will display how it operates. I do however recommend looking at the Dutton-Lainson Hand Winch - TUFFPLATE Finish - Single Speed -…

view full answer...

Answer 5

The only winch post option we offer is the CE Smith Winch Stand part #CE31013G which is designed for 2" trailer tongues. This will then allow you to mount a winch like the Fulton Single Speed Trailer Winch part #F142102 which is what I…

view full answer...

Answer 6

It sounds like you're looking for the CE Smith Winch Stand #CE31013G. This is a stand that your winch will mount to anywhere on your trailer's tongue. It gives you multiple mounting angles and options with 14 mounting holes. It fits 2 inch…

view full answer...

Answer 7

The inside width of the CE Smith Bow Roller Bracket #CE31005PG has an internal width of 3-11/16 inches so for a winch that is narrow enough to fit inside that we have the #DL16001 which measures 3-3/16 inches in width.

view full answer...

Answer 8

The Fulton Single Speed Winch #F142306 appears to be the closest winch that we have to the one in the picture with the CE Smith Bow Roller Bracket for Winch Stands #CE31005PG. It has a similar mount and frame connection with the crank handle and…

view full answer...

Answer 9

The height of the frame does not matter, just the width. So with a 2 inch wide frame you can install CE Smith Winch Stand #CE31013G.

view full answer...

Answer 10

In order to attach the CE Smith Winch Stand part #CE31013G to your boat trailer you would need to cut off the bottom portion of the stand and weld that directly to your trailer's tongue as it is only designed to bolt onto a 2" wide trailer…

view full answer...

Answer 11

Most acrylic coatings will adhere directly to cleaned galvanized metal. A weathered galvanized surface develops a layer of white rust, which must be removed to ensure good adhesion of the coating. Wire brushing or scrubbing with a stiff brush or…

view full answer...

Answer 12

The mounting holes on the bottom of the CE Smith Galvanized Winch Stand #CE31013G measure 7/16-inch. Please refer to the linked photo. This 30-inch tall winch stand is made of 12-gauge steel and is intended for 2-inch trailer tongues. It is…

view full answer...

Fit of CE Smith Winch Stand # CE31013G on 2 Inch Wide Trailer Tongue

Product Page this Question was Asked From

Continue Researching