What Hardware is Required for Assembly of the CE Smith Swivel and Bolster Bracket
Question:
CE10100G with CE10201G, does the bolt threads stop and allow the bracket to swivel? What bolt and nut are required for assembly
asked by: Ralph
Expert Reply:
The CE Smith Bolster and Swivel Bracket, # CE10100G and # CE10201G, do not use bolts with partial thread to allow the swivel bracket to move. Once you have the swivel bracket at the angle you need, you simply tighten the bolt down to hold the swivel bracket in place.
The swivel mounting hole on the swivel and bolster bracket will require a 1/2 inch bolt and the flange mounting holes that are used to secure the bunk board to the swivel bracket are 3/8 inch in diameter. You could simply use wood screws for these holes. All of the mounting hardware is available at any local hardware store.
The mounting slots on the bolster bracket are 1/2 inch wide x 2-3/4 inches long. You will want to choose a u-bolt that will fit around your trailer frame and a nut and washer to secure the bracket to the frame. I have attached a link to all of the u-bolts that we carry.
Products Referenced in This Question
CE Smith Bolster Bracket - Galvanized Steel - 8" Tall - Qty 1
- Boat Trailer Parts
- Bunks
- Bunk Bracket
- 8 Inch Tall
- 2-1/2 Inch Wide
- Galvanized Steel
- CE Smith
more information >
Product Page this Question was Asked From
CE Smith Swivel Bracket for Boat Trailers - Galvanized Steel - 2" Hole Centers - Qty 1
- Boat Trailer Parts
- Bunks
- Swivel Bracket
- 2 Inch Tall
- 1-3/8 Inch Wide
- Galvanized Steel
- 3-1/2 Inch Long
- CE Smith
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: CE Smith Bolt for Bolster and Swivel Bracket Assemblies - 1/2" Diameter - Zinc - Qty 1
- Shop: CE Smith Heavy Duty Swivel Bracket - Galv Steel - 2-1/2" Hole Centers - Qty 1
- Video: CE Smith Boat Trailer Parts CE10201G Review
- Video: CE Smith Deluxe Marine-Grade Bunk Boards Carpeting Review
- Shop: CE Smith Carpeted Bunk Boards for Boat Trailers - 7' Long - 1 Pair
- Shop: CE Smith Swivel Bracket for Boat Trailers - Galvanized Steel - 2" Hole Centers - Qty 1
- Shop: Stainless Steel Hex Lag Screw - 3/8"
- Shop: CE Smith Bolster and Swivel Bracket Assemblies - Galvanized Steel - 9" - Qty 4
- Shop: Dexter Trailer Axle Beam with EZ-Lube Spindles - 89" Long - 3,500 lbs
- Search Results: bow guard
- Search Results: crossmember pad
- Search Results: bow bunk
- Search Results: boat trailer bunk brackets
- Search Results: bow hook
- Search Results: galvanized nuts
- Video: CE Smith Boat Trailer Parts CE10200G Review
- Video: CE Smith Boat Trailer Parts CE10206G Review
- Shop: Suspension Enhancement
- Search Results: leaf spring
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Article: Trailer Tire Sizing
- Article: Double-Eye Trailer Suspension System Review
- Shop: Trailer Hitch
- Shop: Trailer Wiring
- Q&A: How to Determine Weight Capacity of Trailer Axle
- Article: How to Accurately Measure Trailer Leaf Springs
- Shop: Brake Controller
- Article: Most Popular Wheel Bearings
- Q&A: Upgraded Equalizer and Replacement Leaf Springs for 2020 Grand Design Transcend 27BHS
- Video: Dexter Trailer Springs Over-Under Conversion Kit Installation K71-384-00