Do You Have 2015 Little Guy Tag Trailer Lift Kit

Question

Question:

Axle number 4802837. Need lift kit for 2015 little guy tag thank you

asked by: Melody K

0

Expert Reply:

We have a two options available for you although with your square axle there isn't a basic "Lift Kit" that will work for you. The two options are basically the same thing just one is made for larger off road tires and one is made for standard tires. The Timbren Axle-Less Trailer Suspension System - 4" Lift Spindle w/Flange - Off-Road Tires - # ASR1THDS03 and the Timbren Axle-Less Trailer Suspension System - 4" Lift Spindle w/Flange - Regular Tires - part # TASR1THDS04. Both systems will give you as the name implies a 4" lift kit and also have the benefit of upgrading your hubs to a 3500 lb. set over the 2200 lb. set you have now. These can both also be upgraded with electric trailer brakes if you desrired. I've installed these systems and they are fantastic. They make for a much smoother and enjoyable towing experience not just for your but also all of the stuff you will have in your camper.

You will need new hubs and those will depend on your wheels bolt pattern. I will put a guide below to show how to tell. For non brake idler hubs use Trailer Idler Hub Assembly for 3,500-lb Axles # AKIHUB-550-35-K for wheel bolt patterns 5 on 5" and Trailer Idler Hub Assembly for 3,500-lb E-Z Lube Axles - part # AKIHUB-545-35-EZ-K .

If you want to add brakes use Trailer Hub and Drum Assembly - 3,500-lb Axles - part # AKHD-545-35-K for 5 on 41/2" inch and Trailer Hub and Drum Assembly - 3,500-lb Axles - part # AKHD-550-35-K for 5 on 5" The brake assemblies you want are Electric Trailer Brake Kit - 10" - Left and Right Hand Assemblies - 3,500 lbs part # AKEBRK-35.

I have included the FAQ I mentioned on how to measure the bolt pattern and also the videos I have done on the different components to help you along. Happy Camping!

expert reply by: Randy B

0

Answer 1

The Roadmaster Dual Hitch Receiver Adapter, 8" Drop/Rise #RM-077-8 is made to allow you to tow as well as use an accessory. It will allow you to flat tow up to 10,000 lbs and will allow a tongue weight of 400 lbs. The other dual receiver…

view full answer...

Answer 2

Having your towbar within 3 inches high or low of level is perfectly acceptable, according to Blue Ox and Roadmaster. If the #RM-077-4 would allow the towbar to be within that amount plus or minus of level, the dual hitch adapter would work just…

view full answer...

Answer 3

The Roadmaster Dual Hitch Receiver Adapter #RM-077-8 that you referenced is designed for exactly your situation. It will allow your tow bar to set level as you flat tow the lifted vehicle.

view full answer...

Answer 4

For a longer 2 inch ball mount that has 8 inches of drop the Brophy part #EA80 would most likely be your best option. This ball mount has 4-1/8 inches from the center of the hitch pin hole to the beginning of the bend in the ball mount. Or for a…

view full answer...

Answer 5

As the Roadmaster Dual Hitch Receiver #RM-077-8 has a solid shank for added capacity, it does weight right at 28 pounds. I had the Roadmaster High-Low Adapter #RM-048-8 measured as well. From center of one pin hole to the center of the other is…

view full answer...

Answer 6

Since you measured 26-1/2 inches on your old springs you'll likely need 26 inch springs because they will sag and elongate as they wear. Yours are 6-Leaf so you'll need two of #e27SR which are rated for 4500 lbs. This is plenty for a trailer…

view full answer...

Answer 7

If you put on a Hitch Extender #HE06 you will reduce your trailering capacity to 350lbs tongue weight and 3,500 total trailer weight. Most of the receiver extensions with that much rise include a gusset for strength that may prevent the Curt Clamp-On…

view full answer...

Answer 8

You are correct about ball mount #EA80. The ball platform is indeed 1 inch thick. The 2 inch ball #63852 does not have a long enough shank to be used with this ball mount. You will need a 2 inch ball with a long shank such as #63849. It isn't…

view full answer...

Answer 9

I measured the Roadmaster Dual Hitch Receiver Adapter #RM-077-8 for you. On the long support arm the distance from the back of it to the center of the hitch pin hole is 6-5/8 inches. But to the support gusset that measurement is 4-3/4 inches. I have…

view full answer...

Answer 10

The Roadmaster Dual Hitch Receiver Adapter, 8" Drop/Rise #RM-077-8 was designed for exactly this purpose. The 8" rise will allow you to mount a bike rack up higher than your vehicle, providing plenty of clearance between a bike rack and the…

view full answer...

Answer 11

The dual hitch adapter we carry with the highest tongue weight capacity is the Roadmaster Dual Hitch Receiver Adapter part #RM-077-6 for 6" rise or part #RM-077-8 for 8" rise. They both have a 400 lb tongue weight capacity. Please note that…

view full answer...

Answer 12

I have a solution for you but the #RM-077-2 that you referenced was not designed for use when towing a trailer so we can't recommend it for this application. Instead you'd want the part #D210 which has a ball mount platform on the bottom of…

view full answer...

Do You Have 2015 Little Guy Tag Trailer Lift Kit

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching