Autosliding 5th Wheel Hitch and Suspension Enhancement for a 2019 Ram 3500 with OEM Prep Package

Question

Question:

Hello, I have the puck system on my 2019 Ram 3500 and I am wanting to get an autosliding fifth wheel hitch and also I'm looking to install something to help out with my suspension. Any recommendations?

asked by: Ronald

0

Expert Reply:

For an autosliding 5th wheel hitch compatible with the OEM prep package on your 2019 Ram 3500 we have the Demco Hijacker which comes in 18K # DM8550034 and 21K # DM8550035 versions. Since you are also wanting to add suspension enhancement it sounds like you'll be towing a larger trailer so I recommend using the 21K version along with the Adapter Rails # DM6099 to fit your puck system.

Then for suspension enhancement I highly recommend the Air Lift LoadLifter 5000 Ultimate Air Helper Springs # AL88231 which provide you with adjustable suspension enhancement for up to 5,000 lbs. It is worth noting that this kit will not increase the weight capacity of your vehicle, but it will help to stabilize and level out your towing rig.

I also recommend installing the Air Lift WirelessONE Compressor System # AL25980 so that you can monitor and adjust the air pressure in your air bags at your convenience.

Attached are some videos and installation instructions for you to check out.

expert reply by: Jon G

0

click to enlarge

Answer 1

For your application I recommend the Firestone Ride-Rite air bags since they are the best quality on the market. These air bags are compatible with your truck unless it has a factory suspension, and they come in these supporting weight ratings (they…

view full answer...

Answer 2

That is normal. When you increase the cargo weight in your truck that downward force will on the Air Lift LoadLifter 5000 Ultimate Plus Air Springs, #AL88231 should see an increase in psi. There is greater pressure being placed on the air bags. I…

view full answer...

Answer 3

It sounds like the purpose of getting the air helper spring would be to counteract the 1 inch compression you're getting in your rear suspension caused by the pin weight of your 5th wheel. If that's the case, I believe that the AirLift 5000…

view full answer...

Answer 4

For your 2015 GMC Sierra 3500 Denali DRW 4x4, I recommend using the Firestone Ride-Rite Red Label Extreme Duty Air Helper Springs part #F2709 over the Air Lift LoadLifter 7500 XL Air Helper Springs part #AL57538 for two reasons. The first reason is…

view full answer...

Answer 5

The pin on your LCI remote #LC358601 can be reset by following these simple steps. Press "home" button to turn on transmitter. Then press and release "home" button 5 times. Then press "config". The screen will ask you if…

view full answer...

Answer 6

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 7

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 9

We sure do! The only front hitch that is compatible with the 2023 Ram 3500 with a diesel engine is the EcoHitch item #EH37FR. This hitch is custom fit and bolts to your Ram with included hardware. I have linked an installation video below to help you…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

Hey Jeff, appreciate all the details you provided that was super helpful and we do have the MORryde cushioned pin box that is designed to replace a Lippert Rhino pin box. For the 17,695 lb GVWR you mentioned on the 2024 Brinkley Model Z 3610, what…

view full answer...

Answer 12

The Access Toolbox Edition Soft, Roll-Up Tonneau Cover #A93VR is designed to fit the youru 2022 Ram 3500 with a 8' dually bed. The Cover #A37FR will only fit an 8' bed with single rear wheels. This is the only difference in these covers is…

view full answer...