Replacement Trailer Hitch for 2002 Chevy Silverado 2500HD

Question

Question:

I have a 2002 Silverado 2500hd with 8 bed. I need to replace hitch but can’t find right bolt pattern. Mine is 6 1/2 from front bolt on hitch to middle bolt then 5 1/2 from middle to back bolt

asked by: Shane S

0

Expert Reply:

The Curt Trailer Hitch Receiver part # C15312 is what I recommend as a replacement for the factory trailer hitch on a 2002 Chevrolet Silverado 2500HD. In regards to the bolt hole spacing, this will be a different for the Curt Trailer Hitch Receiver as it does not use all of the same attachment points as the factory trailer hitch but it is still a bolt-on option nonetheless.

I have attached a photo to help clarify.

expert reply by: Conner L

0

click to enlarge

James

5/24/2020

I’m trying to figure out what year reciever hitch will fit on my 06 2500 hd ... have someone wanting to sell me a 2013 one for $80 but don’t know if it will fit

Reply

Chris R.

5/27/2020

It doesn't look like the same hitches for the 2013 Silverado fit your 2006 model. If you can obtain the specific hitch model from the seller I would be happy to verify this. In the meantime I've linked our full selection of trailer hitches that are confirmed to fit your 2006 Chevy Silverado below.

Helpful Links

hitch-2006_chevrolet_silverado.htm

Reply

Answer 1

The confusion is that the two answer pages have two different hitches they are referring to. The #C15312 measures 2-3/4 inches from the mounting flange down to the hitch opening and the #C15313 measures 5-5/8 inches. I attached a picture that has…

view full answer...

Answer 2

If your 2002 Chevy Silverado 3500 features the standard factory rear bumper (and not a 10 inch deep drop bumper) then the correct Curt hitch is the Class V #C15312 that you referenced. I have attached an image that shows the difference between a…

view full answer...

Answer 3

I went out into our warehouse and measured both the Curt Hitches you referenced #C15312 and #C15313. THe #C15312 measures 2-3/4 inches from the mounting flange down to the hitch opening and the #C15313 measures 5-5/8 inches.

view full answer...

Answer 4

Yes, the Curt hitch part #C15312 that you referenced does fit your 2007 GMC Sierra Classic dually that has frame dimension of 42 inches from outside to outside on your truck frame.

view full answer...

Answer 5

First I want to congratulate you on wearing out a trailer hitch. You must do some serious towing! To answer your question the Curt Hitch part #C15312 that you referenced is an OEM replacement hitch for your 2001 Chevy Silverado 2500HD. You would be…

view full answer...

Answer 6

Yes I recommend upgrading your tow package on your 2005 Chevrolet Silverado 3500, I recommend the Curt Trailer Hitch Receiver #C15312.This trailer hitch has a bolt-on installation and has a maximum gross trailer weight capacity up to 16,000 pounds.…

view full answer...

Answer 7

The Curt Trailer Hitch Receiver - Custom Fit - Class V XD - 2" #C15312 will fit your 2001 Silverado 3500 with the standard factory bumper. This Class V hitch features a bolt-on installation and comes with a lifetime warranty.

view full answer...

Answer 8

For your 2002 Chevy Silverado you will need to go with a hitch that will fit trucks that do have a factory trailer hitch. For that you would want the Draw Tite hitch part #41944 which will fit your truck once you remove the factory hitch. This…

view full answer...

Answer 9

I called my contact at Curt to confirm these measurements on the Curt #C15313 trailer hitch for you. The width of the hitch from center to center of the bolt holes measures 38-7/8 inches. The top of the receiver to the mounting holes measures 5-7/16…

view full answer...

Answer 10

Both of the Curt hitch receivers have the same bolt hole measurements. It's 9 inches from the first hole (Closest to the front of the truck) to the second hole and 5-1/2 inches from the second to the third. There's 39 inches across from hole…

view full answer...

Answer 11

The distance from the top of the mounting flange or bottom of the truck frame is to the top of the receiver tube on the Curt Trailer Hitch Receiver part #C15312 is 5-5/8".

view full answer...

Answer 12

We do have a hitch extender that will work for your application. After looking thru the available options, it seems the Gen-Y Hitch Hitch Extender for 2" Trailer Hitches #GY89SR is going to be your best bet. This extension is 14" long from…

view full answer...

Replacement Trailer Hitch for 2002 Chevy Silverado 2500HD

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching