Will Curt 15312 Trailer Hitch Receiver Fit 2001 Chevy Silverado 3500 With Standard Bumper

Question

Question:

I have a 2001 Silverado 3500 4x4 dually with 8.1L engine, extended cab, 8foot box LT I believe the C15312 is the correct hitch to fit my truck with the standard bumper, correct? I want a class V hitch.

asked by: Darrel P

1

Helpful Expert Reply:

The Curt Trailer Hitch Receiver - Custom Fit - Class V XD - 2" # C15312 will fit your 2001 Silverado 3500 with the standard factory bumper. This Class V hitch features a bolt-on installation and comes with a lifetime warranty.

expert reply by: Robin H

1

Answer 1

The difference between the Curt Trailer Hitch Receivers #C15312 and #C15313 for your 2006 Chevrolet Silverado 3500 is that part #C15312 will work with vehicles that have the factory cutout bumper only while part #C15313 is designed to be used with…

view full answer...

Answer 2

The Curt trailer hitch part #C15312 that you referenced doesn't have trailer wiring mounting brackets as typically the truck this is installed on has a cutout or opening on the bumper for wiring to attach to. But if you had an aftermarket bumper…

view full answer...

Answer 3

Yes, the Curt hitch part #C15312 that you referenced does fit your 2007 GMC Sierra Classic dually that has frame dimension of 42 inches from outside to outside on your truck frame.

view full answer...

Answer 4

First I want to congratulate you on wearing out a trailer hitch. You must do some serious towing! To answer your question the Curt Hitch part #C15312 that you referenced is an OEM replacement hitch for your 2001 Chevy Silverado 2500HD. You would be…

view full answer...

Answer 5

Yes I recommend upgrading your tow package on your 2005 Chevrolet Silverado 3500, I recommend the Curt Trailer Hitch Receiver #C15312.This trailer hitch has a bolt-on installation and has a maximum gross trailer weight capacity up to 16,000 pounds.…

view full answer...

Answer 6

The distance from the top of the mounting flange or bottom of the truck frame is to the top of the receiver tube on the Curt Trailer Hitch Receiver part #C15312 is 5-5/8".

view full answer...

Answer 7

I did some checking and basically the cutout bumper is the regular factory bumper. The Curt hitch, #C15312, will fit up tighter and a little more recessed, apparently the same way the factory hitch does if it were installed. Some people like the…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Will Curt 15312 Trailer Hitch Receiver Fit 2001 Chevy Silverado 3500 With Standard Bumper

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching