Replacement Tarp for Truxedo TX298101 TruXport Tonneau Cover

Question

Question:

Hi. I have two different numbers in my bed cover and I’m not sure which one can I use as a reference to find the Matching cover for my truck. I have serial # 015488907 and I have stamp on the cover 2981 09-11-13

asked by: Carlos V

0

Expert Reply:

Thanks for sending in the photos of the date code and serial number, that is the key to finding the proper replacement!

We have added the replacement cover to the website for you, the part number for the replacement cover is # TR34FR

expert reply by: Mike L

0

click to enlarge

Answer 1

The Replacement Cover #TX1117655 is the correct fabric for the TruXedo Lo Pro Soft Roll-up Tonneau Cover #TX578101 that you have on your 2006 Ford F-150 with the 6-1/2' bed.

view full answer...

Answer 2

I reached out to Truxedo who confirmed that you need the Replacement Rear Header End Plugs for TruXedo Lo Pro Soft Roll-up Tonneau Cover #TX1117467. They informed me that these are the replacement plugs for all the Lo Pro covers manufactured since…

view full answer...

Answer 3

According to Truxedo, the date code is printed or handwritten on the underside of the tarp, usually on the passenger side up near the cab. The part number for the TruXport tonneau for your 2010 GMC Sierra 2500 short bed is #TX271101-CVR, but Truxedo…

view full answer...

Answer 4

The correct replacement for a Demco Master Cylinder 05680-C is the Replacement Master Cylinder part #5650. I spoke with Demco to confirm this for you.

view full answer...

Answer 5

I agree it is the right time to upgrade to a Lithium charger/converter as not all are Lithium compatible. I recommend using the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K which is a replacement for your…

view full answer...

Answer 6

The correct replacement master cylinder kit we have for your Demco setup is the part #DM5918 which comes with the lock out replacement.

view full answer...

Answer 7

The part you referenced 127194TB is a double-lip seal with an inner diameter of 1.274-inches and an outer diameter of 1.983-inches. The available seal nearest to those dimensions that we offer is part #RG06-010, which is a double-lip seal sold as a…

view full answer...

Answer 8

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

Answer 9

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 10

The AL-KO trailer hub part number 8700 that you have is a 3,500 lb trailer hub/drum with a 5 on 4-1/2 inch bolt pattern. Based on that the #AKHD-545-35-EZ-K is the correct fit and would work great.

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

If you are installing just the Firestone Ride-Rite kit, #F2400, and not also adding an on-board air compressor such as #F2158, then I would estimate that it should take about 2 hours to install the kit. That is for someone with some mechanical…

view full answer...

Replacement Tarp for Truxedo TX298101 TruXport Tonneau Cover

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching