Truxedo Replacement Cover Fabric For Lo Pro Tonneau Cover On a 2006 Ford F-150 6-1/2' Bed

Question

Question:

I have a 2006 ford f150 fx4. Im not quite sure which Truxedo model I currently have. There is a single left side release to unlock the cover. I cannot find a model or serial number. I would like to be sure of the model before I order the replacement cover.

asked by: Daniel G

0

Expert Reply:

The Replacement Cover # TX1117655 is the correct fabric for the TruXedo Lo Pro Soft Roll-up Tonneau Cover # TX578101 that you have on your 2006 Ford F-150 with the 6-1/2' bed.

expert reply by: Bud M

0

Customer Image
(click to enlarge)

Answer 1

That part number indicates you have a Truxedo Lo Pro QT tonneau on your 2008 Ford F-150 with a 6-1/2 foot bed so for a tonneau tarp replacement you'd want the #TX1117655 and you'd be set.

view full answer...

Answer 2

I verified with TruXedo that the tonneau cover you have on your 2004 Ford F-150 is the Lo Pro QT #TX578101. The replacement tarp you need is #TX1117655. It does not come with the rails.

view full answer...

Answer 3

Thanks for sending in the photos of the date code and serial number, that is the key to finding the proper replacement! We have added the replacement cover to the website for you, the part number for the replacement cover is #TR34FR

view full answer...

Answer 4

I reached out to Truxedo who confirmed that you need the Replacement Rear Header End Plugs for TruXedo Lo Pro Soft Roll-up Tonneau Cover #TX1117467. They informed me that these are the replacement plugs for all the Lo Pro covers manufactured since…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 9

Hey Cynthia, thanks for reaching out! We've got the Draw-Tite Class IV #75506 and the Draw-Tite Class V #41933 that fit your 2006 Ford F-150 STX as long as it doesn't have the factory hitch. I've attached some installation videos of these…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

Hi Jeff; thanks for the question and sturdy is definitely a good word for the etrailer tonneau that fits your 2022 Ram 1500 with a 5-1/2 foot bed, the etrailer Hard Tonneau Cover #e35DR. It's made of a fiberglass-reinforced plastic which is a…

view full answer...