Will BOLT Trailer Coupler Lock Fit 4-3/4 Inch Trailer Coupler Width

Question

Question:

Will this lock fit over a 4-3/4 inch coupler of a 2020 Jayco Travel Trailer. the Coupler has a 4 3/4 inch wide flange .

asked by: John B

0

Expert Reply:

The BOLT Trailer Coupler Lock has a 5-1/2 inch inside width, so it will fit the 4-3/4 inch width of the coupler on your 2020 Jayco Travel Trailer with no problem.

There are a couple of different BOLT coupler locks for Fords, and I have added a photo showing the difference between the keys for the BOLT Trailer Coupler Lock - 1-7/8", 2", and 2-5/16" Couplers - For Ford Key # BL7032491 and For Ford Side Cut Key # BL7032496.

It looks like you have a 2018 Ford F-350, which means the latter key is likely going to be the right one for your truck.

expert reply by: Kyle S

0

click to enlarge

Answer 1

Your 2022 Ford Ranger doesn't have a brake controller wiring port under the dash and instead has 4 wires that are sticking out of the large wire harness that goes through the diriver's side firewall left of the brake pedal. They have shrink…

view full answer...

Answer 2

You will need to use a standard weight distribution kit like the Heavy Duty Trunnion Weight Distribution System #RP66131 for your I-beam trailer. This system would be rated perfectly for your 10k trailer if it was going to be loaded near it's…

view full answer...

Answer 3

This is a pretty common issue with aluminum frames so we definitely have a options available for you. With that being said, the 8 inch frame height will make things a bit more difficult, but not impossible. First, the Curt TruTrack Weight…

view full answer...

Answer 4

I called my contact at Curt and they told me that you can use the Curt Heavy Duty Forged Ball Mount, part #C45331 flipped over if you wish but you will probably have a heck of a time removing the ball. They said the ball is machine-torqued at 450…

view full answer...

Answer 5

I definitely understand how safety chain capacities and determining exactly what chain rating you need for your trailer can be a bit confusing. To keep it as simple as possible, safety chain requirements state that the breaking strength of EACH…

view full answer...

Answer 6

All of our cargo boxes, including the SportRack Vista XL #SR7018 that you referenced, state in the instructions that the box must be removed before entering an automatic car wash. The cargo boxes do help protect your cargo against the elements but…

view full answer...

Answer 7

There isn't an adapter to connect the wiring of a Furrion camera to a Voyager. With that said you can pretty easily just cut the connectors off and then connect to the camera since it's only two wires.

view full answer...

Answer 8

The Demco Hydraulic Trailer Brake Actuator part #DM72VR should be a direct replacement for the Atwood 61101 Brake Actuator that you have now. This newest updated it rated at 7K instead of 6K. This is a bolt on option that mounts on 3" centers.…

view full answer...

Answer 9

The usable span of the Bolt Hitch Lock part #BL7023585 that you referenced is a little over 3-1/2 inches. If you check out the picture I attached you'll see all of the dimensions of the lock. This lock is intended for use with 2-1/2 inch hitches…

view full answer...

Answer 10

It sounds like the dealer messed with your factory wiring harness and you want to replace it with the T-Connector Vehicle Wiring Harness with 7-Way Trailer Connector #118288. The correct way to run the wires is to connect the dome light to the 12V…

view full answer...

Answer 11

Thank you for sending the photo! While I have a solution for you, the Blaylock Total-Encasement Coupler Lock, part #BLTL-23 will not work. I is designed to fit Bulldog Collar-Lok style couplers that use a 2-5/16" ball, like #BD028463 for…

view full answer...

Answer 12

I have a solution for you. When considering a ladder rack for your 2020 GMC Sierra 1500, it is important to determine if your truck's stake pockets are open and accessible. If you have a BAKFlip MX4 installed on your vehicle, the stake pockets on…

view full answer...