Hitch, Wiring And Brake Controller For 2019 Kia Sorento 3.3L V6 AWD

Question

Question:

I want to tow with my 2019 Kia Sorento. No clue what I need to buy or do here. Help!

asked by: Garth B

0

Expert Reply:

Your towing package will need to include a hitch, wiring harness, ball mount and hitch ball to get you ready to tow. One important point is to check the vehicle capacity to make sure your Sorento's limits are not exceeded by the tow duty you're assigning it. Also know that your tow setup is limited by it's lowest rated component so all these parts need to be within their respective limits for safe use.

For the hitch, I recommend the etrailer.com Trailer Hitch Receiver # e98843. This sturdy hitch will do the job well for you. It comes in a matte black finish that is more scratch resistant than glossy finishes and blends in well with the undercarriage of your Kia Sorento. Included is an installed example.

For wiring harness, the ZCI Circuit Protected Vehicle Wiring Harness Kit # 119250KIT makes the installation process easier because there is no splicing or cutting of wires required to install which is often preferred with newer vehicles.

A simple solution for a the ball mount and hitch ball is the Pro Series Adjustable 3-Ball Mount # 63070 which comes with the ability to adjust the height of the ball mount (rise or drop) as well as the ball size. This provides flexibility should you need to pull different trailers in the future. Included is a Help Article explaining more about rise and drop and why a level towing setup is so important to your towing experience.

Included are video resources for additional information.

expert reply by: Patrick R

0

click to enlarge

Answer 1

I want to start by thanking you again for your recent order. We appreciate your business. When it comes to installing the Curt Trailer Hitch Receiver, #C13068, on your 2002 Honda Odyssey, it is best to just clean out the bolt holes on your frame…

view full answer...

Answer 2

The trailer hitch I recommend for a 2019 Kia Sorento LX is the etrailer Trailer Hitch Receiver part #e98843 which is a direct bolt-on fit with no cutting or drilling required. It has a class III rating with plenty capable 2" receiver tube…

view full answer...

Answer 3

There is not currently a hidden or concealed hitch for the 2019 Kia Sorento SX. The hitch I recommend for your 2019 Kia Sorento SX is the etrailer Trailer Hitch Receiver #e98843. It has a flat black finish on it, so it will help hide dirt and…

view full answer...

Answer 4

For your 2019 Kia Sorento LX with the V6 engine, I recommend the etrailer.com Trailer Hitch Receiver #e98843 because it offers a 5,000 lb towing capacity and a tongue weight rating of 750 lbs. The matte black finish on the etrailer hitch is a nice…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 9

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 10

If your 2020 Kia Sorento has the factory tow package, there will be a tail light wiring connector behind the rear tire of the driver side, on the outside of the frame rail. As shown in the attached photos, an underbody cover will need to be removed…

view full answer...

Answer 11

To replace your NOK AD2527E seal you can use #168233. It has an inner diameter of 1.688 inches and an outer diameter of 2.332 inches. Based on what I could find on the NOK AD2527E the inner diameter is the same and the outer diameter is 2.328 inches.…

view full answer...

Answer 12

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...