Mounting Instructions for Redline # PF11X35W-2 Fenders

Question

Question:

Do you have mounting instructions for these brackets to attach them to the PF1135 fender?

asked by: Chris

0

Expert Reply:

I do not have instructions, but I can explain how the fender brackets are used. The mounting brackets slide into the underside of the step on either side of the fender with the open end of the bracket facing downward. The fender secures to the bracket by running a bolt (not included) through existing holes in the fender into holes in the bracket.

The flat top edge of the bracket attaches to the underside of the trailer frame using U-bolts that are not included.

We offer two suitable u-bolts that might work for you, depending on the height of your frame members. The # 7163183UB is 3 inches long, and the # 7163184UB is 4 inches long.

Check out the photo I provided, which will hopefully make it more evident for you.

expert reply by: Mike L

0

click to enlarge

Answer 1

It looks like the Single Axle Trailer Fenders #PF11X35W-2 that you referenced would be your best option. But before you order it check out the dimensions for it in the picture that I attached so that you can compare them to your trailer. For a Load…

view full answer...

Answer 2

The closest fender we offer to what you have has a distance of 28 inches between the mounting brackets. This would be the Fulton Single Axle Trailer Fender #F008573. I wish we had exactly what you would need, but if you would be willing to move your…

view full answer...

Answer 3

We definitely have a few options available to replace you current fenders, but if you are looking for the most solid one, the Redline Single Axle Fender #PF11X35W-2 will be the best. This will attach to the frame with included brackets, but something…

view full answer...

Answer 4

We won't have an exact OEM fender part for your 1997 EZ-Loader boat trailer but we do offer a range of general purpose trailer fenders in plastic, aluminum and steel. I linked for you just the plastic fenders we have for 14-inch wheels and the…

view full answer...

Answer 5

From what I have found, the parts on the sheet you are talking about are no longer around. We do have some available options but they will not be identical to what you currently have. For bunk brackets for your Escort boat trailer, I recommend the CE…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 8

Thank you for the photos! According to my information and what you sent in, your best option for a replacement fender is the CE Smith Black Fender: CE Smith Single Axle Trailer Fender w/ Top and Side Steps - #CE19503 (Qty 1) CE Smith Single Axle…

view full answer...

Answer 9

Load range B trailer tires are going to have a lower capacity than C load range tires. Basically that, psi rating, and the ply rating are the only differences. A higher load range tire would last a little longer than lower load ranges of the same…

view full answer...

Answer 10

To find the load capacity for your axle you should look on the trailer VIN plate or sticker that lists the VIN number. The weight rating of the axle should be listed on that same plate or sticker. Also, the axle could have a tag or plate on it that…

view full answer...