Recommended Trailer Hitch for a 2008 Fleetwood Discovery Motorhome

Question

Question:

Looking for a hitch for a 2008 Fleetwood discovery

asked by: Shane B

0

Expert Reply:

The best option we have for a 2008 Fleetwood Discovery Motorhome is the Multi-Fit Motor Home Trailer Hitch part # 82201. In order to install this hitch you will need to drill into the frame but this is the only option since they don't have any direct bolt-on fits.

expert reply by: Conner L

0

Answer 1

As far as mounting your 472-pound motorcycle along with the 52-pound Ultra-Fab Dirt Bike Carrier #UF48-979033 on your hitch rated for 500-pound hitch, you should definitely upgrade the hitch. This is because it is extremely dangerous to exceed the…

view full answer...

Answer 2

We do carry universal hitches that are rated for 10,000 pounds and above, like the Draw-Tite part #41990-07. I've linked the selection. With that being said a lot of times when a motorhome is rated for 5,000 pounds towing it isn't the hitch…

view full answer...

Answer 3

The Super Titan 4000 Weld-On Trailer Hitch part #38124 is a weld on application and does not come in a bolt on version. All of our heavy duty truck hitches are weld-on but the Buyers Products Class 4 Service Body Long Hitch Receiver part #3371801055…

view full answer...

Answer 4

The flange dimensions of the Buyers Products Class 4 Service Body Short Hitch Receiver part #3371801053 are 8-1/4" x 6-5/8".

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

Thanks for the pictures! 2" hitches do not all have a 5,000 lbs capacity. The capacity varies by vehicle. That is an old Reese 06497 hitch and the sticker is correct. It does indeed top out at 3,500 lbs. It looks like this hitch came on all of…

view full answer...

Answer 11

We do have a couple Class V hitch options available for your 2020 F53 and I have 3 options listed below. These will all be rated to 16,000 pounds towing and 1,600 pounds of tongue weight and use a 2" receiver opening. They will all also fit a…

view full answer...

Answer 12

The trailer hitches we have available for the 2014 GMC Savana Van are designed to fit the full size van model. To see if these will fit your Cutaway version, I just recommend taking a couple measurements on the vehicle's frame. The trailer hitch…

view full answer...

Recommended Trailer Hitch for a 2008 Fleetwood Discovery Motorhome

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching