Where is Fuse that Needs to be Removed to Flat Tow 2014 Honda CR-V  

In order to flat-tow a 2012 - 2014 Honda CR-V with all four wheels on the ground behind a motorhome you are going to need a tow bar, base plate kit, safety cables, tail light wiring harness, supplemental braking system, and possibly a high-low…

The local shop is wrong. According to the owner's manual for a 2013 Honda CR-V you can flat tow the vehicle behind a motorhome with all 4 wheels on the ground. Not only that but the manual also states that AWD models have to be towed with all…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

The breakaway systems for supplemental braking systems are built into them and aren't something you add after the fact. For example, the Blue Ox Patriot part #BLU37TR has a breakaway system already built into it that is included.

To flat tow your 2014 Honda CR-V with the Blue Ox Avail Tow Bar #BX7420 to you will need to install a baseplate kit. The kit for your vehicle that will work with the Avail is #BX2258. This is a custom design, specifically for your CR-V. To power the…

The Roadmaster brake relay kit #RM-88400 you referenced will prevent your 2014 Honda CR-V's brake signal from overriding the turn signal sent by your RV. It's only active when you depress the brake pedal. If the brake light relay isn't…

Blue Ox does not have multiple color options for their tow bar covers like what fits your Ascent #BX4370. Only option would be the part #BX88309.

Most RV propane systems use a low pressure regulator because the appliances are low pressure. You can check the information stamped into your regulator to determine if it is high or low pressure or offers both. High pressure regulators are usually 30…

I went ahead and took a look, and it appears the closest I was able to find is the: -Roadmaster Dual Hitch Receiver Adapter, 2" or 10" Drop/Rise #RM-077-10. This dual hitch receiver adapter can give either 2"-10" of rise or drop…

Yes, you can use a dual hitch adapter for flat towing and carrying a bike rack at the same time. You just need the one with the correct rise or drop, and you can choose from the following: - 2" or 4" Drop/Rise: Roadmaster Dual Hitch…

The part #RM-070 has a distance of 6 inches from the pin hole to the angled bracket and has the 4 inches of rise/drop you need so it would be a great solution.

A 2-inch high/low hitch adapter like Roadmaster #RM-048-6 will provide 6-inches of drop (or rise) to allow your 2-inch cargo carrier to be lower than hitch height. Part #RM-048-4 will give you 4-inches of drop (or rise). Do please note three…