How To Wire Brake Buddy Battery Charger 39339

Question

Question:

Brake Buddy Battery Charger #39339 Installation Instructions

asked by: William G

1

Helpful Expert Reply:

The BrakeBuddy Towed Vehicle Battery Charge Kit part # BB54FR comes with a the Brake Buddy Select 3 Portable Supplemental Braking System part # HM39524. I have attached a wiring diagram of how this is setup with the Brake Buddy.

expert reply by: Heather A

1

click to enlarge

Answer 1

There is not currently an adapter available so you will have to splice some wires together to install the Brake Buddy Stealth Supplemental Braking System - Proportional #HM39530 in your 2020 Jayco Greyhawk. The brake controller of this system has 4…

view full answer...

Answer 2

One end of the umbilical cord that comes with the Brake Buddy Stealth Supplemental Braking System part #HM39530 is a 7-blade round connection that connects to motor home's 7-way plug. The other end is a 7-flat connector that plugs into the…

view full answer...

Answer 3

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

view full answer...

Answer 4

If all you want is to prevent the 12 volt power supply of your trailer battery wiring from backfeeding onto your vehicle wiring or vice versa what you need is a one-way diode like part #RM-690. This only allows current to flow in one direction so…

view full answer...

Answer 5

We can't recommend you drill into the base plate to mount the breakaway switch as that would void the warranty of the base plate kit. Instead I would recommend mounting the switch to the bumper of the vehicle.

view full answer...

Answer 6

There is not a wiring diagram for the Hopkins Trailer Connector Adapter - 7-Pole Round Pin to 7-Pole RV #HM47425 but I have added a photo showing the functions of a 7-pin round and 7-way RV blade style, which is what this adapter was intended for.…

view full answer...

Answer 7

On a 7 pin round which is the common connection on a semi trailer, the clearance/marker lights are at the 10 o clock position when you look at the trailer wiring connection. When looking at the connector on the back of the truck, that will put the…

view full answer...

Answer 8

The SMI Stay-IN-Play DUO Supplemental Braking System part #SM99251 is compatible with your 2016 Cadillac SRX. However, as you mentioned the stop light circuit on this vehicle will go dead while in tow mode. Therefore, in order to power the monitor…

view full answer...

Answer 9

Yes, the the Roadmaster Tail Light Wiring Kit with Bulbs, #RM-155 can be used with the Brake Buddy Classic 3, #HM39494. We actually have an install video created for the Brake Buddy Classic 3, #HM39494, see link below. This is located on the product…

view full answer...

Answer 10

The Replacement Shank for Gen-Y Adjustable Ball Mount part #325-GH-304 is my recommendation on an adjustable receiver used for flat-towing. It will provide up to a 7-1/2" rise or drop depending on configuration.

view full answer...

Answer 11

We have just what you need. For vehicles that have to have the battery disconnected to be flat towed but then use a supplemental braking system designed to draw power from the towed vehicle you'd want the outlet kit part #RM-9332. This actually…

view full answer...

Answer 12

I have attached a diagram that shows the pin designations for the 7-Pole Round to 7-Pole Flat Trailer Connector Adapter, #HM47425. I labeled the pins as they relate to the RV side 7-way blade connector. The 7-way round pin connectors typically have…

view full answer...

How To Wire Brake Buddy Battery Charger 39339

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching