Solera Slide-Out Awnings for Grand Design Reflection

Question

Question:

Good afternoon! Can you please provide a quote for the following slideout covers black. Ive added 2 1/2inch as suggested. 125x24 71 1/2inch x 20 145 x 37

asked by: Geoff L

1

Helpful Expert Reply:

I am happy to provide you with the correct Solera Slide-Out Awnings for the slide-outs on your Grand Design Reflection!

If I am understanding correctly, it sounds like you have already added 5 inches to each of the slide-out widths that you listed (2-1/2 inches on each side of the slide-out). If this is the case you will need the following Slide-Out Awnings:

125" x 24" slide-out (120" flange to flange) - part # LCV000182037 for Black or # LCV000163293 for White
71-1/2" x 20" slide-out (66-1/2" flange to flange) - part # LCV000231482 for Black or # LCV000163274 for White
145" x 37" slide-out (140" flange to flange) - part # LCV000177334 for Black or # LCV000163298 for White

I have attached a short video demonstration on the Solera Slide-Out Awning that you can also check out. All pricing information will be listed on the product pages.

expert reply by: Chris R

1

Answer 1

I believe I understand what you are asking and while the handle of the Valterra Waste Valve Bodies w/ Flexible Cables for RV Black Water and Gray Water Tanks - 72" #TC1372 can be pointed down, and it is capable of a 90 degree angle, the cable…

view full answer...

Answer 2

Measuring to pick out the correct slide topper for an RV like your 2018 Forest River Rockwood is pretty easy. You have to measure the box width including the flange on it and you'll be set. So the Solera part #LCV000163288 that you referenced is…

view full answer...

Answer 3

For a black awning to fit your 53-1/8 inch flange width slide out we have the part #LCV000421394 and then for the 79 -1/2 inch slide out you'd want the part #LCV000168105 which is also black. Both of these come with hardware too.

view full answer...

Answer 4

It is true that movement and stress can cause screws to become loose over time but adding Butyl Tape Item #344270341410-1 to the mounting bracket before installing it on the slide out can help prevent movement of the screws and prevent water from…

view full answer...

Answer 5

Thanks for the photo, and if there isn't the needed clearance, you need to get the slide topper the next size down that won't interfere. For example, if you normally would get the 79 inch wide Solera RV Slide-Out Awning #LCV000168105, but it…

view full answer...

Answer 6

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 7

Assuming your Sprinter has the factory tow package with the 7-way at the rear bumper, in addition to the #RED24FR Redarc Tow-Pro Liberty Brake Controller, you'll also need the #3063-P wiring harness and the #331-TPH-017. The connector to install…

view full answer...

Answer 8

The best option we offer for your dump trailer is the Erickson Mesh Tarp and Truck Bed Cover part #EM57059 which measures 12' wide x 16' long. It's not the exact dimensions you wanted but it will still cover most of the area you need it…

view full answer...

Answer 9

If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs part #23-105 or Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs part #23-106 will…

view full answer...

Answer 10

For the LCI52-SB-86.5-68.5, the two ending measurements are: 1st - measurement from hub to hub, meaning the length of the axle in this case is 86.5 inches. 2nd - spring seat dimension where they're welded, meaning the spring seats are 68.5 inches…

view full answer...

Answer 11

The Trailer Leaf Spring, 2250 lbs. 6 Leaf, item #e27SR, is sold as a replacement spring for older trailers and measures 26 inches for eye to eye, center to center. If you are replacing the springs and hangers you will need to use the same center to…

view full answer...

Answer 12

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Solera Slide-Out Awnings for Grand Design Reflection

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching