Landing Gear Lead Leg Repair Kit For Lippert 178653 Lead Leg

Question

Question:

Have a 2010 Keystone Montana 3400RL and need to replace the lead leg of the landing gear. Research tells me I need part #LC178653. Is there a compatible repair kit for this part? I cant seem to find out if there is or not...

asked by: Steven Z

0

Expert Reply:

If you do in fact have the Lead Leg # LC178653 on your 2010 Keystone Montana 3400RL then the repair kit that you need is part # LC146059. I confirmed this with my contact at Lippert.

expert reply by: Jon G

0

Answer 1

The Keystone Montana RV line actually uses a unique, custom landing gear system from Lippert. Because of this, Lippert produces specific OEM replacement legs that are designed specifically for your 2009 Keystone Montana 5th Wheel Trailer. For the…

view full answer...

Answer 2

In order to determine if the issue you are having with your landing gear legs clicking and popping is caused by the gear box or leg assembly you will simply need to disconnect the gear box from the legs and then test each manually. If you feel…

view full answer...

Answer 3

Since 17-1/2 inches and 17-3/8 inches is only 1/8 of an inch difference you might have measured incorrectly. You will want to measure the inside-to-inside dimensions of your frame clamps just to make sure. If you for sure measured 17-3/8 inches…

view full answer...

Answer 4

The replacement landing gear for the Keystone Montana will require welding if the brackets need to be replaced. The legs you need are #LC178653 for the lead leg and #LC178652 for the follow leg.

view full answer...

Answer 5

The correct replacement landing gear legs are the Lippert Replacement Lead Leg for Kestone Montana 5th Wheel #LC178653 and the Replacement Follow Leg #LC178652. You mentioned that you've already replaced the motor and switch, ##LC217884, and the…

view full answer...

Answer 6

We sell replacement legs for the Keystone Montanas, but we do not offer the smaller replacement parts you mentioned. For the lead leg we have the part #LC178653 and then for the follow leg we have the part #LC178652.

view full answer...

Answer 7

Yes. You can rebuild the #LC178652 (follow leg) and #LC178653 (lead leg) with part #LC146059 for the lead leg and part #LC146060 for the follow leg.

view full answer...

Answer 8

Landing gear legs do typically have weld stop brackets to hold the legs securely to the welded brackets on your trailer frame. The landing gear will have a maximum capacity lift, which for the Replacement Follow Leg for Stromberg Carlson Landing Gear…

view full answer...

Answer 9

I went out to our warehouse to take a look at the Replacement Follow Jack w/ Drop Leg #LG-179014 that you mentioned. The leg itself does indeed have a length of exactly 29-1/2 inches. The distance between the welded tabs, inside to inside, is right…

view full answer...

Answer 10

I spoke with my contact at Stromberg Carlson who confirmed that the Replacement Lead Leg #LG-177202 will work well as a replacement for your Venture VMC900. Then for the matching follower leg you would want the part #LG-177201.

view full answer...

Answer 11

To make sure that both the Keystone landing legs are the same extended distance you can measure with measuring tape at the bottom of the legs or count to make sure they have the same amount of holes visible on the inner tube. I recommend to replace…

view full answer...

Answer 12

It would be best to replace the bad leg all together based on what you described. For that the Montanas use a specific leg replacement unlike the other brands. For that you'd need the part #LC178652 for the follow leg and then part #LC178653 for…

view full answer...

Landing Gear Lead Leg Repair Kit For Lippert 178653 Lead Leg

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching