Replacement Waste Valves for a 2001 Winnebago Rialta

Question

Question:

Need waste replacement valve for Rialta 2001 Looked at your parts but none appear to match our part. Any suggestions.

asked by: Sharon D

1

Helpful Expert Reply:

If you can send me a photo of your waste valve setup then I may have an option for you but I don't know what you have now. If you cannot find an entire assembly then you might be interested in just replacing the valve as almost all assemblies use the same configuration, part # T1003VP for 3" or part # T1001VP for 1-1/2". If this will not work then again just send me a photo of your waste valve setup. Please note, we do not carry the piping that leads from the valve to the tank only the waste valves that attach to the outlet of the piping.

I have attached a full list of our sewer waste valves in case you may have missed some.

expert reply by: Conner L

1

Answer 1

We have confirmed that the cable of the Valterra waste valves like part #TC172 can be trimmed shorter. While we don't have a video that shows this process you'd need to cut the outer cable and inner cable before assembling the valve.…

view full answer...

Answer 2

I do have a solution for you but I was not able to find an exact replacement for the 1996 Winnebago Rialta running light lens measurements you provided. We do carry the Peterson lens part #136-15A that measures 3-1/2" long x 1-1/8"…

view full answer...

Answer 3

I have a solution for you, but because Winnebago does not have a company that they allow to make aftermarket lights for, we won't have an exact replacement for the Winnebago part #113709-01-000. I recommend going with the Peterson Thin Line…

view full answer...

Answer 4

The Valterra Double RV Waste Valve, #T84B, has an overall measurement of 11-3/4" from edge to edge.

view full answer...

Answer 5

The Progressive Dynamics PD9100L part #PD9160ALV is exactly what you are looking for. It's a lithium only battery charger that is rated for 60 amps so it would be perfect for you.

view full answer...

Answer 6

You as the consumer wouldn't be able to adjust the puck system as it's typically welded to a frame that's attached to the vehicle's frame. Manufacturers do make mistakes so you could have a bad puck system from the factory and would…

view full answer...

Answer 7

The Ultra Breeze Trailer Roof Vent Cover which fits over your Dometic vent FV1400 is available in Black #DMC38FR or White #FVU1500WH. These covers are custom molded so the vent lid fits into the cover when opened.

view full answer...

Answer 8

While in theory, you would be able to use the Camco Automatic Changeover 2-Stage Propane Regulator #CAM59005 to switch from one propane tank to another while using your generator. The issue actually comes from the generator and more specifically the…

view full answer...

Answer 9

Yes, by removing your current Converter #PD4560CSV in your Progressive Dynamics RV Power Control Center #PD4560K18LS8 and replacing it with a Lithium Converter #PD4560LICSV you will be able to safely charge and maintain your new Lithium batteries.

view full answer...

Answer 10

The gaskets to go along with the RV Sewer Elbow #T1039-1 are typically included with the gate valves, but you can get replacements with part #T1003-9VP.

view full answer...

Replacement Waste Valves for a 2001 Winnebago Rialta

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching