Recommended Replacement for Ventline V2065 Bathroom Vent

Question

Question:

We have a bathroom vent that needs to be replaced. Philips V2065 115 volt .9amp. We would like to replace the entire assembly not just the motor. Do you sell the entire assembly?

asked by: L L

0

Expert Reply:

The Ventline model V2065 Vent assembly is no longer available. If you are wanting/needing to replace the entire vent then your only option will be with a different model unit that closely matches the dimensions of the V2065.

I recommend taking a look at the Ventline Vanair Trailer Roof Vent # VP-543SP, which requires a 6-1/4 inch diameter roof opening and extends 3-1/4 inches above the roof when it's open. This is a really nice vent that has a really quiet operation and only draws 1-1/2 amps during operation.

I have attached a short video review that you can check out as well.

expert reply by: Chris R

0

Answer 1

I have a different option for you, but the Ventline Model V2045 Bathroom Vent Fan you have is no longer available. The closest option we have is the MaxxFan Dome Plus Roof Vent w/ 12V Fan - LED Light - 6" Diameter - Manual Lift - White…

view full answer...

Answer 2

The Replacement Fan Motor #BCD0390-00 referenced in your question is the correct motor for your Ventline V2045 model fan. I did also go out to our warehouse to take a look at the motor and measured a length of 1-1/2 inches for the exposed length on…

view full answer...

Answer 3

The V2044 fan has been discontinued for awhile, but the Ventline #BCD0390-00 would be the correct 110V-AC motor. I've confirmed that these are the proper replacements with my Ventline representative. For the fan blade the replacement for the…

view full answer...

Answer 4

The correct fan for the motor #BCD0390-00 is going to be the #BCD0311-00, which is a 5-5/8" diameter blade.

view full answer...

Answer 5

The process may differ depending on your exact model of Ventline Fan, but you will first need to gain access to the motor which will likely require you to go in to the assembly from the top/roof. You will then remove the dome/lid or screen which will…

view full answer...

Answer 6

I spoke with my contact at Ventline regarding your Ventline exhaust fan model V2065. He stated that for a replacement motor, you will actually want the Replacement Fan Motor #BCD0390-00. This will work nicely as a replacement on your existing unit so…

view full answer...

Answer 7

The correct replacement motor for your fan is the 110-Volt AC Fan Motor #BCD0314-00 which is 100 CFM capacity.

view full answer...

Answer 8

We've spoken with Ventline and they have told us that the correct replacement motor for the Ventline fan V2065 is the part #BCD0390-00. I attached a review video for this for you to check out as well.

view full answer...

Answer 9

To replace the motor on your Ventline V2065 bathroom exhaust fan you'll want to use the #BCD0390-00. If your fan has an overall diameter of 7", the fan blades can be replaced with the Replacement Fan Blade for Ventline Bath Room Ceiling…

view full answer...

Answer 10

I spoke with my contact at Ventline and she stated that for your V2245-50 exhaust fan you can use the Replacement Fan Motor #BCD0390-00. This will work perfectly with your existing fan.

view full answer...

Answer 11

We have gotten this question before and have found that the correct replacement motor for your Ventline V2265 is the Replacement 110-Volt AC Fan Motor for Ventline Ventadome Roof Vents #BCD0390-01. Replacement parts for these fans are often used on…

view full answer...

Answer 12

The correct replacement motor for your Ventline V2065 fan is indeed part #BCD0390-00 and the proper replacement fan blade is part #BVA0312-00. The replacement blade is 6-1/2 inches in diameter, which is what the 6.5 on your existing blade means.…

view full answer...