Will Replacement Motor # BCD0390-00 Fit Ventline V2045 Fan

Question

Question:

VENTLINE EXHAUST FAN #V2045 WHAT IS THE SHAFT LENGTH FOR THE MOTOR FOR THIS FAN. IS THE BCD0390-00 THE CORRECT REPLACEMENT?

asked by: LORIN

1

Helpful Expert Reply:

The Replacement Fan Motor # BCD0390-00 referenced in your question is the correct motor for your Ventline V2045 model fan. I did also go out to our warehouse to take a look at the motor and measured a length of 1-1/2 inches for the exposed length on the shaft.

expert reply by: Chris R

1

click to enlarge

Answer 1

I have a different option for you, but the Ventline Model V2045 Bathroom Vent Fan you have is no longer available. The closest option we have is the MaxxFan Dome Plus Roof Vent w/ 12V Fan - LED Light - 6" Diameter - Manual Lift - White…

view full answer...

Answer 2

The Ventline model V2065 Vent assembly is no longer available. If you are wanting/needing to replace the entire vent then your only option will be with a different model unit that closely matches the dimensions of the V2065. I recommend taking a…

view full answer...

Answer 3

The V2044 fan has been discontinued for awhile, but the Ventline #BCD0390-00 would be the correct 110V-AC motor. I've confirmed that these are the proper replacements with my Ventline representative. For the fan blade the replacement for…

view full answer...

Answer 4

The correct replacement motor for your Ventline V2262-50 bathroom fan is the part #BCD0388-00 and it's held on with a couple nuts on top of the support beam like you see in the attached picture. To access the fasteners to remove the beam…

view full answer...

Answer 5

We definitely have replacements for your Ventline 2262-50 motor and fan blade. With that being said, the Replacement 110-Volt AC Fan Motor for Ventline RV Bathroom Insert Fan with 50 CFM Capacity #BCD0388-00 will be a direct replacement. There does…

view full answer...

Answer 6

The Replacement Fan Blade for Ventline Bathroom Ceiling Vents - 6-1/2" Blade #BVA0312-00 should be installed so that the fan blades push the air outside. This is for a bath exhaust fan so you don't want the fan blades just…

view full answer...

Answer 7

The Replacement 110-Volt AC Fan Motor part #BCD0314-00 spins both clockwise and counterclockwise depending on how it is wired and oriented. The shaft is indeed splined which you can see from the photos on the product page.

view full answer...

Answer 8

The Ventline V2044 Bathroom Ceiling Vent can use the Replacement 110-Volt AC Fan Motor for Ventline RV Bathroom Insert Fan w/100 CFM Capacity #BCD0314-00 or the Replacement Fan Motor for Ventline Exhaust Fan #BCD0390-00. We have confirmed with…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

I spoke with my contact at Ventline and she stated that for your V2245-50 exhaust fan you can use the Replacement Fan Motor #BCD0390-00. This will work perfectly with your existing fan.

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Will Replacement Motor # BCD0390-00 Fit Ventline V2045 Fan

Product Page this Question was Asked From

Continue Researching