Class V Trailer Hitch For 2019 Nissan Titan XD

Question

Question:

large trailer hitch for 2019 nissan titan xd? i want something pretty heavy duty.

asked by: Ed W

0

Expert Reply:

We have exactly what you need for your 2019 Nissan Titan XD, the Curt Trailer Hitch # C15306, because this monster of a hitch is Class V rated with a towing capacity of 16,000 lbs and tongue weight capacity of 2,400 lbs.

It will fit your '19 Titan XD, even if you already have the factory hitch - it will simply fit below that hitch to give you a bigger, meaner hitch. As you can see by the linked installation instructions the Curt # C15306 does not require any drilling into your truck's frame to install, as it simply just bolts on.

You would need an equally heavy-duty ball mount with this hitch, such as the Curt Heavy Duty Forged Ball Mount # C45341 which gives you either 3" of rise or 4" of drop and has a 17,000 lb capacity. You will need Pin and Clip # C21500 or Trailer Hitch Receiver Lock # e98880 to secure the ball mount to your hitch. For a hitch ball you will need either 2" Hitch Ball # A-90 or 2-5/16" Hitch Ball # C40008.

I have added links to a couple video reviews for you to check out as well.

expert reply by: Kyle S

0

Larry R.

6/18/2020

I have a 2017 nissan titan with the stock class 3 hitch. I want to replace it with a class 5. What is your part number cost, and all accessories for it. Also how hard is it to install..I was going to install a Shocker HD 16k air hitch for the receiver. Thank you for your help.

Reply

Chris R.

6/22/2020

If you have the 2017 Nissan Titan XD the only hitch we have available that will fit models with the factory hitch is the Curt Class V # C15306 mentioned above, which will actually sit below the factory receiver. I don't believe the OEM unit can be removed because it's essentially part of the bumper/frame. The Curt model is a simple bolt-on installation. All the necessary hardware is included.

Reply

Answer 1

For your 2019 Nissan Titan XD without the factory hitch the Curt Class III Receiver Hitch #C13317 will work perfectly. This particular model is designed specifically for your truck and will use existing holes in the frame rails for a simple…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two…

view full answer...

Answer 4

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 8

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has…

view full answer...

Answer 9

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only…

view full answer...

Answer 10

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

view full answer...

Answer 11

The Kuat Sherpa 2.0 #SH22G and the NV 2.0 #NV22G that you referenced are both excellent platform-style racks that will hold your bikes by the front wheels with no frame contact. These are top-of-the-line carriers and you really would not go wrong…

view full answer...

Answer 12

The trailer hitch I recommend for a 2023 Hyundai Tucson is the Curt Trailer Hitch Receiver part #C94WR which I confirmed as a fit with Curt for all models, including the Hybrid. This trailer hitch features a bolt-on installation so there is no…

view full answer...

Class V Trailer Hitch For 2019 Nissan Titan XD

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching