I Ordered a # 84656UC3 Hub/Drum, Where are the Races  

From everything I could find, the AL-KO T35 axle will use the same 4-Bolt Pattern as the Dexter Electric Trailer Brake Kit #23-26-27. With that being said, the mounting flange bolt hole distance the will fit will be 2-7/8" apart on center, so I…

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

The difference really comes down to brand recognition, price, and warranty, but apart from that they are very similar. Dexter is a leading brand and people know they are getting quality, hence the higher price. They Dexter also do have a 5-year…

The main difference between a ST205/75-14 size tire like the Contender #AC14R45SM and a ST215/75-14 size tire like the Taskmaster Provider Item #TTWTR21514 is that the larger number is a slightly larger size. The 205 has a section width of 7.99"…

Yes, radial tires are much preferred over bias ply tires for a number of reasons. The main difference between a radial ply and a bias ply tire is how the tire is constructed. The cords inside a bias ply tire run at a 32 degree angle to the direction…

The Kenda Karrier ST205/75R14 Radial Trailer Tire #AM10235 (Load Range D) and the Kenda Karrier ST215/75R14 #AM10229 (Load Range C) that you referenced are simply different tire sizes. The ST215/75R14 tire size is larger in diameter/height by just…

Since the Lippert trailer axle 402767 is a 3,500 lb trailer axle the bearing kit part #BK2-100 is the correct fit for it.

The Electric Trailer Brake Kit part #AKEBRK-7-SA and Dexter Nev-R-Adjust Electric Trailer Brake Kit part #23-458-459 are both great options. If you're looking for the best available option then go with the Dexter but if you're looking for a…

To pick out bearings for a trailer hub you will need to remove one of the hubs so that you can remove the bearings and get the numbers off of them as we don't have a way to look up what a trailer uses based on brand. Or, you can measure the…

With your 3500lb axles we have many brake assembly options, however they all fit on the brake flange that is 4 hole square. The drums you pictured are agricultural and we don't have anything that is a fit for a replacement. My recommendation is…

While the standard axle diameter for a 3,500 lb trailer axle is 2-3/8 inches it's not unheard of to see a 3 inch diameter 3,500 lb axle. All of our 3,500 lb axles like the part #7359765 are 2-3/8 inches.

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…